2026-04-21T07:31:09Zhttps://ebiltegia.mondragon.edu/oai/request

oai:ebiltegia.mondragon.edu:20.500.11984/69842026-03-30T13:21:07Zcom_20.500.11984_1143col_20.500.11984_1148

00925njm 22002777a 4500 dc Etxebeste , Mikel author Ortiz-de-Zarate, Gorka author ARRIETA, Iñaki Mirena author ARRAZOLA, PEDRO JOSE author 2025 Long milling tools are often limited in productivity due to chatter vibrations. Embedded Tuned Mass Dampers (TMDs) in these tools have proven to be an effective solution for reducing chatter and increasing productivity. The performance of TMDs is highly dependent on the correct dimensioning and selection of the most suitable damping materials, which cannot be determined through trial and error, making modeling essential. This study presents a new TMD design for milling tools, optimized through Finite Element Method (FEM) modeling. The FEM analysis allows for maximizing damping efficiency through the precise selection of optimal dimensional parameters tailored to the specific tool geometry. A prototype of the optimized TMD tool was manufactured and experimentally tested, validating the FEM model through tap testing and showing significantly improved performance in machining tests, with reduced chatter compared to the original undamped tool. 2212-8271 https://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=186247 https://hdl.handle.net/20.500.11984/6984 Milling process Finite element method (FEM) Chatter Tuned Mass Damper Modeling Damping Finite Element Modeling to Design Optimized TMD for Milling Tools