2026-04-21T03:34:53Zhttps://ebiltegia.mondragon.edu/oai/request

oai:ebiltegia.mondragon.edu:20.500.11984/66682024-10-18T06:15:27Zcom_20.500.11984_473col_20.500.11984_478

00925njm 22002777a 4500 dc Llavori, Inigo author Zabala, Alaitz author Larrañaga, Miren author 2024 Residual stresses and surface roughness have been recognized to play a critical role in the fatigue strength of metal components. Machining processes can induce different roughness and residual stress conditions depending on the parameters used in the process. Therefore, it is essential to develop knowledge that helps to predict the residual stresses and roughness that would be obtained from different machining conditions. Due to the growing interest from the industry in the use of 42CrMo4 steel because of its excellent mechanical properties, the main objective of this work is to establish two phenomenological models to accurately predict the residual stress and roughness values in turned specimens of this material. The models are derived from data of four process variables: (a) insert tip radius; (b) feed rate; (c) cutting speed; and (d) depth of cut. For this purpose, a wide experimental campaign has been developed, which includes the machining of 68 specimens under various cutting scenarios, and their subsequent measurement of residual stresses and roughness. Once the experimental data were obtained, the response surface method based on the central composite design was used to fit the models, obtaining a correlation index higher than 0.9 in both cases. In this article, it is concluded that feed rate and insert radius have a greater effect on the residual stress and roughness obtained, while cutting speed and depth of cut have a lesser impact on the results. It is hoped that the findings will establish a groundwork for the machining of this material type, ensuring controlled conditions of residual stress and roughness. 0268-3768 https://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=178018 https://hdl.handle.net/20.500.11984/6668 Turning surface roughness Residual stresses response surface methodology Response surface methodology Influence of turning parameters on residual stresses and roughness of 42CrMo4 + QT