2026-04-07T10:30:50Zhttps://ebiltegia.mondragon.edu/oai/request

oai:ebiltegia.mondragon.edu:20.500.11984/59102024-03-04T14:25:05Zcom_20.500.11984_1143col_20.500.11984_1148

Influence of manufacturing tolerances and eccentricities on the unbalanced magnetic pull in permanent magnet synchronous motors Galfarsoro, Unai McCloskey, Alex Zárate Barriga, Sergio Almandoz, Gaizka Hernandez, Xabier Stators Rotors Coordinate measuring machines Magnetic field measurement Iron Position measurement Harmonic analysis Eccentricity is an inevitable fault in electric motors and hence its diagnosis is an important topic. Thus, the influence of static and dynamic eccentricities on the harmonics of the frequency spectra of the unbalanced magnetic pull is analyzed.In this study, dimensional tolerances of the rotor and the stator are also considered. All parts have dimensional tolerances in their designs and their real magnitudes vary to some extent from the theoretical values after the manufacturing process. Thanks to the finite element simulations, verified with experimental results, it is observed that the deviations originated by the manufacturing tolerances produce changes in the amplitudes of some harmonics and also additional and characteristic harmonics in the frequency spectra of the unbalanced magnetic pull. These are not negligible and must be taken into account when robust eccentricity detection procedures are defined. Otherwise, harmonics originated by tolerances and by eccentricities can be misidentified. 2022-12-07T15:42:17Z 2022-12-07T15:42:17Z 2020 http://purl.org/coar/resource_type/c_c94f 978-1-7281-9945-0 2381-4802 https://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=161610 https://hdl.handle.net/20.500.11984/5910 eng © 2020 IEEE IEEE