2026-04-07T10:31:40Zhttps://ebiltegia.mondragon.edu/oai/request

oai:ebiltegia.mondragon.edu:20.500.11984/59102024-03-04T14:25:05Zcom_20.500.11984_1143col_20.500.11984_1148

00925njm 22002777a 4500 dc Galfarsoro, Unai author McCloskey, Alex author Zárate Barriga, Sergio author Almandoz, Gaizka author 2020 Eccentricity is an inevitable fault in electric motors and hence its diagnosis is an important topic. Thus, the influence of static and dynamic eccentricities on the harmonics of the frequency spectra of the unbalanced magnetic pull is analyzed.In this study, dimensional tolerances of the rotor and the stator are also considered. All parts have dimensional tolerances in their designs and their real magnitudes vary to some extent from the theoretical values after the manufacturing process. Thanks to the finite element simulations, verified with experimental results, it is observed that the deviations originated by the manufacturing tolerances produce changes in the amplitudes of some harmonics and also additional and characteristic harmonics in the frequency spectra of the unbalanced magnetic pull. These are not negligible and must be taken into account when robust eccentricity detection procedures are defined. Otherwise, harmonics originated by tolerances and by eccentricities can be misidentified. 978-1-7281-9945-0 2381-4802 https://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=161610 https://hdl.handle.net/20.500.11984/5910 Stators Rotors Coordinate measuring machines Magnetic field measurement Iron Position measurement Harmonic analysis Influence of manufacturing tolerances and eccentricities on the unbalanced magnetic pull in permanent magnet synchronous motors