2026-04-20T21:56:35Zhttps://ebiltegia.mondragon.edu/oai/request

oai:ebiltegia.mondragon.edu:20.500.11984/57612026-01-29T08:36:28Zcom_20.500.11984_473col_20.500.11984_478

Microstructural aspects of the transition between two regimes in orthogonal cutting of AISI 1045 steel Saez de Buruaga, Mikel Soler Mallol, Daniel ARRAZOLA, PEDRO JOSE Medina Clavijo, Bentejui Motz, Christian Chuvilin, Andrey Machining Cutting Microstructure Dynamic recrystallization Built-up edge AISI 1045 In depth understanding of tool-chip friction behavior is a significant aspect for tool wear performance in steels. In the present work attention has been paid to the strain mode of the chip section in contact with the rake surface of the tool, and its influence on the mechanics of material removal. There is a multitude of evidence for the existence of qualitatively different cutting regimes in orthogonal machining of annealed AISI-1045 steel with uncoated P15 carbide cutting tools in dry conditions at cutting speeds between 5 and 200 m/min. The evaluation of chip morphology and microstructure, and cutting and feed forces, revealed an abrupt step-like transition at a cutting speed in the range of 50–60 m/min, which was attributed to the transition from built-up edge (BUE) mode developed at low cutting speed, to the mode at which the chip slides directly over the tool surface. These qualitatively distinct mechanisms of tool-chip interaction are determined by two different microstructural effects: work hardening by severe plastic deformation and microstructural softening by dynamic recrystallization (DRX). It is argued that the onset of DRX is the reason for further instability of BUE and thus is the main cause of change of the cutting regime. 2022-10-25T17:07:14Z 2022-10-25T17:07:14Z 2018 http://purl.org/coar/resource_type/c_6501 0924-0136 https://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=147800 https://hdl.handle.net/20.500.11984/5761 eng © 2018 Elsevier Elsevier