2026-04-22T05:38:49Zhttps://ebiltegia.mondragon.edu/oai/request

oai:ebiltegia.mondragon.edu:20.500.11984/55852024-03-05T12:09:05Zcom_20.500.11984_473col_20.500.11984_478

00925njm 22002777a 4500 dc Penalba, Markel author Aizpurua Unanue, Jose Ignacio author 2021 Marine Renewable Energy (MRE) systems are designed to maximise energy generation and ensure survivability. The traditional design process is based on pure environmental conditions, tends to be too conservative and limits the decision-making options. This paper presents a preliminary study on a novel risk-index combining the probabilistic occurrence matrix of sea-states with a consequence matrix. The stochastic direct sampling method is used for the quantification of occurrence matrices and consequences are estimated for fatigue effects and extreme loads. The paper shows a comparison of three design points (DPs) with increasing conservatism selected using metocean data for the period 1990–2000: high- and medium-risk DPs based on the novel risk index, and a low-risk DP obtained from a traditional PCA-based environmental contour. These DPs are compared to metocean data collected via in-situ measurements for the period 2000–2020, where the designed MRE system is supposed to operate. Results show that the low-risk DP overestimates the design Hs by 50%, while the high-risk DP underestimates it by 20%. The former would result in significant over-costs, while the later would very likely lead to catastrophic damages. The design Hs suggested by the medium-risk DP matches with the maximum Hs measured between 2000–2020, showing its suitability. 0029-8018 https://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=166533 https://hdl.handle.net/20.500.11984/5585 Marine Renewable Energy design Risk index Re-analysis metocean data Environmental contours Fatigue and extreme loads On the definition of a risk index based on long-term metocean data to assist in the design of Marine Renewable Energy systems