2026-04-07T10:03:24Zhttps://ebiltegia.mondragon.edu/oai/request

oai:ebiltegia.mondragon.edu:20.500.11984/55392024-03-04T12:33:24Zcom_20.500.11984_1143col_20.500.11984_1148

00925njm 22002777a 4500 dc Garay, Ainara author Soler Mallol, Daniel author ARRAZOLA, PEDRO JOSE author 2012 Orthogonal tests on cylindrical workpieces were carried out to analyze the effect of heat treatment on the machinability of newly developed Ti54M titanium alloy in comparison with Ti64. This paper focuses on the comparison of forces and temperature of the tool during dry orthogonal cuttings of Ti64 and three different heat treated Ti54M alloys. Forces and temperature are mainly affected by variation in cutting speed and feed, therefore, the depth of cut is maintained constant while cutting speed and feed are varied. Forces and temperature have been measured and chips are analyzed to establish a direct relationship between machinability and the different heat treatment conditions. 2212-8271 https://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=90373 https://hdl.handle.net/20.500.11984/5539 Titanium alloys Heat treatment Microstructure Cutting forces Temperature Chips Effect of heat Treatment Conditions on the Machinability of Ti64 and Ti54 M Alloys