2026-04-20T12:53:59Zhttps://ebiltegia.mondragon.edu/oai/request

oai:ebiltegia.mondragon.edu:20.500.11984/54522026-03-17T07:48:55Zcom_20.500.11984_1143col_20.500.11984_1148

00925njm 22002777a 4500 dc Soler Mallol, Daniel author Rodríguez Ceberio, Antonio Javier author Vicente Flores, José Ignacio author Ezeiza, J. C. author Zuriarrain Berasategui, Aitor author ARRAZOLA, PEDRO JOSE author Badiola, Xabier author Dominguez Romero, Erika author 2021 Additive Manufacturing (AM) has become the new paradigm of design and production strategies. While structural and functional materials are the most implemented ones, it is also possible to manufacture parts using precious metals, being copper one of the most interesting. Among AM technologies, the novel Atomic Diffusion Additive Manufacturing (ADAM) hasrecently included this material between available ones. ADAM is free from thermal and energetic issues caused by high reflectivity and conductivity of copper which other AM encounter. Therefore, it could be a great alternative to manufacture pure copper. In this work ADAM was used to fabricate pure copper specimens in order to measure electrical and mechanical properties. The influence of a machining post processes in strength and ductility is also discussed. Results are compared with wrought C1 1000 copper and published results of other AM technologies. Despite the newness of ADAM, significant improvement in surface roughness and comparable results in other properties was observed. However, further research shall be done to optimize the manufacturing parameters in order to increase the relative density value, as it was found to be significantly lower than in other AM technologies. 1757-8981 https://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=166112 https://hdl.handle.net/20.500.11984/5452 additive manufacturing ADAM Copper Conductivity Mechanical Machining Mechanical and electrical properties of additively manufactured copper