2026-04-22T12:39:43Zhttps://ebiltegia.mondragon.edu/oai/request

oai:ebiltegia.mondragon.edu:20.500.11984/54042024-03-04T13:57:08Zcom_20.500.11984_473col_20.500.11984_478

00925njm 22002777a 4500 dc Fernandez de Arroiabe, Peru author Martinez Agirre, Manex author Bou-Ali, M. Mounir author 2022 Different methodologies have been used in the literature to determine the absorbed vapour mass flux in falling film absorbers. So far, however, there has been little discussion about the impact of different ap- proaches in the numerical models’ performance. This study compared different methods for considering absorption in LiBr −H 2 O vertical tube-type falling film absorbers operating at both inlet subcooling and equilibrium conditions. This comparison was made based on three different criteria: the way of consider- ing the absorption, the method to determine the absorption rate, and the assumption of the existing type of diffusion at the interface. The influence of the methodology was demonstrated using 2D multiphase CFD model. The effect of different operating conditions on the methods was also examined. Finally, the results of the numerical models were compared with three experimental works, and the most suitable model was chosen, which properly agrees with them. 0017-9310 https://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=164751 https://hdl.handle.net/20.500.11984/5404 Absorption Falling-film Heat and mass transfer Numerical analysis Lithium-bromide Numerical analysis of different mass transfer models for falling film absorbers