2026-04-22T10:28:53Zhttps://ebiltegia.mondragon.edu/oai/request

oai:ebiltegia.mondragon.edu:20.500.11984/11342024-03-04T12:33:24Zcom_20.500.11984_473col_20.500.11984_478

Soler Mallol, Daniel ARRAZOLA, PEDRO JOSE Aristimuño, Patxi Xabier Saez de Buruaga, Mikel Garay, Ainara 2019-01-16T12:02:09Z 2019-01-16T12:02:09Z 2018 1359-4311 https://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=146026 https://hdl.handle.net/20.500.11984/1134 A new method for measuring temperature in the rake face of a tool during dry orthogonal cutting using ther- mography is presented. In addition, a new technique is also used to calibrate the infrared camera. Using this technique, real temperature values from camera response are directly obtained without the need for emissivity correction. Emissivity is thus not an uncertainty source. These techniques were applied to machining AISI 4140. Rake face temperatures are reported and correlation with cutting forces outlined. The set-up effectively showed temperature distribution on the rake face. eng © 2018 Elsevier Ltd. Temperature measurement Infrared thermography Metal cutting Orthogonal cutting New Calibration method to measure Rake Face Temperature of the tool during Dry Orthogonal Cutting using Thermography http://purl.org/coar/resource_type/c_6501