
Ikusi/ Ireki
Izenburua
Finite Element Modeling to Design Optimized TMD for Milling ToolsBertsioa
Postprinta
Eskubideak
© 2025 The AuthorsSarbidea
Sarbide irekiaArgitaratzailearen bertsioa
https://doi.org/10.1016/j.procir.2025.02.077Non argitaratua
CIRP Conference on Modeling of Machining Operations (CMMO) 20. Mons, 22-23 May 2025Argitaratzailea
ElsevierGako-hitzak
Milling process
Finite element method (FEM)
Chatter
Tuned Mass Damper ... [+]
Finite element method (FEM)
Chatter
Tuned Mass Damper ... [+]
Milling process
Finite element method (FEM)
Chatter
Tuned Mass Damper
Modeling
Damping [-]
Finite element method (FEM)
Chatter
Tuned Mass Damper
Modeling
Damping [-]
Laburpena
Long milling tools are often limited in productivity due to chatter vibrations. Embedded Tuned Mass Dampers (TMDs) in these tools have proven to be an effective solution for reducing chatter and incre ... [+]
Long milling tools are often limited in productivity due to chatter vibrations. Embedded Tuned Mass Dampers (TMDs) in these tools have proven to be an effective solution for reducing chatter and increasing productivity. The performance of TMDs is highly dependent on the correct dimensioning and selection of the most suitable damping materials, which cannot be determined through trial and error, making modeling essential. This study presents a new TMD design for milling tools, optimized through Finite Element Method (FEM) modeling. The FEM analysis allows for maximizing damping efficiency through the precise selection of optimal dimensional parameters tailored to the specific tool geometry. A prototype of the optimized TMD tool was manufactured and experimentally tested, validating the FEM model through tap testing and showing significantly improved performance in machining tests, with reduced chatter compared to the original undamped tool. [-]
Finantzatzailea
Gobierno VascoGobierno Vasco
Gobierno Vasco
Gobierno Vasco
Gobierno de España
Programa
Elkartek 2024Programa de apoyo a la I+D Empresarial Hazitek 2022
Sin información
Ikasiker 2022-2023
Proyectos de Generación de Conocimiento y a actuaciones para la formación de personal investigador predoctoral
Zenbakia
KK-2024-00005ZL-2022-00741
PRE_2023_1_0134
IT1443-22
PID2022-139655OB-I00
Laguntzaren URIa
Sin informaciónSin información
Sin información
Sin información
Sin información
Proiektua
Nueva generación de procesos para la (re)fabricación sostenible (ORLEGI)(EVMACH)
Sin información
Grupo de Mecanizado de Alto Rendimiento
Diseño a medida de la integridad superficial de los componentes mecanizados para mejorar su durabilidad en aplicaciones de salud y Aeronáuticas (TAILORSURF)
Bildumak
Item honek honako baimen-fitxategi hauek dauzka asoziatuta: