Erregistro soila

dc.rights.licenseAttribution 4.0 International*
dc.contributor.authorAldeiturriaga Olabarri, Naiara
dc.contributor.authorARRAZOLA, PEDRO JOSE
dc.contributor.otherSpitaels, Laurent
dc.contributor.otherBossu, Julien
dc.contributor.otherMartic, Gregory
dc.contributor.otherJuste, Enrique
dc.contributor.otherRivière-Lorphèvre, Edouard
dc.contributor.otherDucobu, François
dc.date.accessioned2024-07-18T06:08:13Z
dc.date.available2024-07-18T06:08:13Z
dc.date.issued2024
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=177766en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/6586
dc.description.abstractHybrid manufacturing relies on the combination of different processes to overcome their own limitations. Combining additive manufacturing such as material extrusion (MEX) and subtractive conventional processes such as milling enables the production of complex design parts with smooth surface and tight tolerances to be foreseen. However, finishing a part directly in the printer by milling operations brings new questions as the maximal force the part can withstand before debonding from the build platform. This paper proposes an experimental method to determine this force by studying the influence of several parameters: the adhesion strategy, the infill pattern and density, the zone of the part where the force is applied as well as the influence of the part design. The method was successfully tested with Polylactic Acid (PLA) parts on a standard MEX printer: the Ultimaker 2+. In the best configuration: no brim, cubic infill of 95% and a force applied on an entire part face, the parts resisted to a force of 50.59 N ± 1.97 N.en
dc.language.isoengen
dc.publisherMaterials Research Forum LLCen
dc.rights© 2024 The Authorsen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectadditive manufacturingen
dc.subjectpeel testen
dc.subjecthybrid manufacturingen
dc.subjectmaterial extrusionen
dc.titleExperimental evaluation of the maximal force before debonding a part from the build platform of an AM printeren
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceMaterials Research Proceedingsen
local.contributor.groupMecanizado de alto rendimientoes
local.description.peerreviewedtrueen
local.identifier.doihttps://doi.org/10.21741/9781644903131-10en
local.contributor.otherinstitutionhttps://ror.org/02qnnz951es
local.contributor.otherinstitutionhttps://ror.org/02x4mx473es
local.source.detailsVol. 41. Pp. 90-99, 2024
oaire.format.mimetypeapplication/pdfen
oaire.file$DSPACE\assetstoreen
oaire.resourceTypehttp://purl.org/coar/resource_type/c_c94fen
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85en


Item honetako fitxategiak

Thumbnail
Thumbnail

Item hau honako bilduma honetan/hauetan agertzen da

Erregistro soila

Attribution 4.0 International
Bestelakorik adierazi ezean, itemaren baimena horrela deskribatzen da: Attribution 4.0 International