Título
Damping characterisation of an elevator ropeAutor-a (de otra institución)
Otras instituciones
OronaVersión
Version publicada
Derechos
© 2022 KU Leuven, Departement Werktuigkunde, LMSD (Mecha(tro)nic System Dynamics)Acceso
Acceso embargadoIdentificador
http://past.isma-isaac.be/downloads/isma2022/proceedings/Contribution_300_proceeding_3.pdfEditor
ISMAResumen
The ropes of an elevator transmit the vibrations from the motor to the elevator car, and consequently have a great influence on comfort. Therefore, it is of major interest to analyse the dynamic behav ... [+]
The ropes of an elevator transmit the vibrations from the motor to the elevator car, and consequently have a great influence on comfort. Therefore, it is of major interest to analyse the dynamic behaviour of these elements. In the present work, the characterisation of the damping of an elevator rope was carried out. Three type of damping estimation methods were analysed. First, the Half Power Bandwidth (HPB) method was used. In addition, due to the low signal quality obtained in some results, the logarithmic decrement method was employed. Finally, experimental Modal Analysis (EMA) algorithms were carried out. According to the results, similar damping values were obtained with the three methods. Thus, it is confirmed that the HPB
method is the most interesting procedure. On the one hand, it is not necessary a previous signal conditioning that requires the definition of the filtering conditions by the analyst. On the other hand, instead of measuring the acceleration response of several points, only one acceleration response signal is enough [-]
Colecciones
- Congresos - Ingeniería [341]