eBiltegia

    • Zer da eBiltegia? 
    •   eBiltegiari buruz
    •   Argitaratu irekian zure ikerketa
    • Sarbide Irekia MUn 
    •   Zer da Zientzia Irekia?
    •   Mondragon Unibertsitatearen dokumentu zientifikoetara eta irakaskuntza-materialetara Sarbide Irekia izateko politika instituzionala
    •   Mondragon Unibertsitatearen ikerketa-datuetara Sarbide Irekia izateko Politika instituzionala
    •   Babes digitalerako jarraibideak
    •   Zure argitalpenak jaso eta zabaldu egiten ditu Bibliotekak
    • Euskara
    • Español
    • English

Laguntzailea:

  • Kontaktua
  • Euskara 
    • Euskara
    • Español
    • English
  • eBiltegia buruz  
    • Zer da eBiltegia? 
    •   eBiltegiari buruz
    •   Argitaratu irekian zure ikerketa
    • Sarbide Irekia MUn 
    •   Zer da Zientzia Irekia?
    •   Mondragon Unibertsitatearen dokumentu zientifikoetara eta irakaskuntza-materialetara Sarbide Irekia izateko politika instituzionala
    •   Mondragon Unibertsitatearen ikerketa-datuetara Sarbide Irekia izateko Politika instituzionala
    •   Babes digitalerako jarraibideak
    •   Zure argitalpenak jaso eta zabaldu egiten ditu Bibliotekak
  • Hasi saioa
Ikusi itema 
  •   eBiltegia MONDRAGON UNIBERTSITATEA
  • Ikerketa-Artikuluak
  • Artikuluak-Ingeniaritza
  • Ikusi itema
  •   eBiltegia MONDRAGON UNIBERTSITATEA
  • Ikerketa-Artikuluak
  • Artikuluak-Ingeniaritza
  • Ikusi itema
JavaScript is disabled for your browser. Some features of this site may not work without it.
Thumbnail
Ikusi/Ireki
Effects of Different Si Content and Thermal Stories.pdf (3.295Mb)
Erregistro osoa
Eragina

Web of Science   

Google Scholar
Partekatu
EmailLinkedinFacebookTwitter
Gorde erreferentzia
Mendely

Zotero

untranslated

Mets

Mods

Rdf

Marc

Exportar a BibTeX
Izenburua
Effects of Different Si Content and Thermal Stories on the Secondary Phase Formation, Hot Ductility, and Stress Rupture Properties of Alloy 718 Investment Castings
Egilea
Bernal, Daniel
Egilea (beste erakunde batekoa)
Niklas, Andrea
Santos, Fernando
Gonzalez-Martinez, Rodolfo
Cobos, Alberto
Vázquez, Lexuri Lexuri
Álvarez, Pedro
Ikerketa taldea
Procesos avanzados de conformación de materiales
Beste instituzio
Azterlan
EIPC Research Center
IK4-Lortek
Bertsioa
Postprinta
Eskubideak
© The Minerals, Metals & Materials Society and ASM International 2023
Sarbidea
Sarbide bahitua
URI
https://hdl.handle.net/20.500.11984/6094
Argitaratzailearen bertsioa
https://doi.org/10.1007/s11661-023-07046-4
Non argitaratua
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science  Vol. 54. Pp. 2670–2688, 2023
Lehenengo orria
2670
Azken orria
2688
Argitaratzailea
Springer
Laburpena
Herein, the effects of microstructure on high-temperature properties (hot ductility and stress rupture life) were investigated in alloy 718 investment castings manufactured with different Si contents ... [+]
Herein, the effects of microstructure on high-temperature properties (hot ductility and stress rupture life) were investigated in alloy 718 investment castings manufactured with different Si contents (0.051, 0.11, and 0.17 wt pct) and different cooling rates (0.52 °C/s and 1.65 °C/s). For the casting with a low cooling rate, an additional solution treatment step was added to the standard pre-weld heat treatment. Even small amounts of residual Laves phase (0.14 to 0.35 wt pct) adversely affected both the hot ductility and stress rupture properties. Hot ductility tests indicated that the presence of Laves phase led to an earlier decrease in hot ductility in on-heating tests and retarded ductility recovery in on-cooling tests. Both effects are usually associated with poorer weldability and greater hot cracking susceptibility. Ductility recovery was also affected by grain size and aspect ratio: columnar and smaller grain sizes showed better ductility recovery behavior. Stress rupture tests indicated that stress rupture life and elongation decreased with increasing Si content, due to the presence of a semicontinuous network of Laves phase at grain boundaries instead of intergranular δ phases. This effect was much more pronounced in stress rupture than in hot ductility tests. The presence of residual Laves phase was associated with higher Si content and lower cooling rates. The additional solution treatment step of 2 hours at 1052 °C did not eliminate the Laves phase completely. [-]
Sponsorship
Gobierno Vasco
Projectu ID
info:eu-repo/grantAgreement/GV/Elkartek 2020/KK-2020-00047/CAPV/Desarrollo de materiales cerámicos y metálicos de altas prestaciones para fabricación avanzada/CEMAP
Bildumak
  • Artikuluak - Ingeniaritza [745]

Zerrendatu honako honen arabera

eBiltegia osoaKomunitateak & bildumakArgitalpen dataren araberaEgileakIzenburuakMateriakIkerketa taldeakNon argitaratuaBilduma hauArgitalpen dataren araberaEgileakIzenburuakMateriakIkerketa taldeakNon argitaratua

Nire kontua

SartuErregistratu

Estatistikak

Ikusi erabilearen inguruko estatistikak

Nork bildua:

OpenAIREBASERecolecta

Nork balioztatua:

OpenAIRERebiun
MONDRAGON UNIBERTSITATEA | Biblioteka
Kontaktua | Iradokizunak
DSpace
 

 

Nork bildua:

OpenAIREBASERecolecta

Nork balioztatua:

OpenAIRERebiun
MONDRAGON UNIBERTSITATEA | Biblioteka
Kontaktua | Iradokizunak
DSpace