Share
Title
Modular battery energy storage system design factors analysis to improve battery-pack reliabilityPublished Date
2022Publisher
ElsevierKeywords
Battery-pack
lithiumion battery
Low voltage
Modular batteries ... [+]
lithiumion battery
Low voltage
Modular batteries ... [+]
Battery-pack
lithiumion battery
Low voltage
Modular batteries
reliability [-]
lithiumion battery
Low voltage
Modular batteries
reliability [-]
Abstract
Traditional battery energy storage systems (BESS) are based on the series/parallel connections of big amounts of cells. However, as the cell to cell imbalances tend to rise over time, the cycle life o ... [+]
Traditional battery energy storage systems (BESS) are based on the series/parallel connections of big amounts of cells. However, as the cell to cell imbalances tend to rise over time, the cycle life of the battery-pack is shorter than the life of individual cells. New design proposals focused on modular systems could help to overcome this problem, increasing the access to each cell measurements and management. During the design of a modular battery system many factors influence the lifespan calculation. This work is centred on carrying out a factor importance analysis to identify the most relevant variables and their interactions. The analysis models used to calculate the reliability of the batteries are the state of health (SoH) and the Multi-State System (MSS) analysis with the Universal Generating Function (UGF), while electronic devices reliability is approximated using constant failure rate achieved with FIDES guide. Thus, it is determined numerically that module redundancy, cell capacity, module voltage and their interactions are the most determinant design characteristics. [-]
Publisher’s version
https://doi.org/10.1016/j.est.2022.105256ISSN
2352-152XPublished at
Journal of Energy Storage Vol. 54. Artículo 105256. October, 2022Document type
Article
Version
Submitted
Rights
© 2022 ElsevierAccess
Embargoed Access (until 2024-10-31)Collections
- Articles - Engineering [483]
Related items
Showing items related by title, author, creator and subject.
-
Review of computational parameter estimation methods for electrochemical models
Miguel, Eduardo; Oca, Laura; IRAOLA, UNAI (Elsevier Ltd, 2021)Electrochemical models are an incipient technique for estimation of battery cells internal variables, useful for cells design or state of function optimization. One of the non-trivial procedures that allow the use of this ... -
Partial state-of-charge mitigation in standalone photovoltaic hybrid storage systems
GARAYALDE, ERIK; Aizpuru, Iosu; Canales, Jose Maria (MPDI, 2019)Energy Storage in photovoltaic installations has increased in popularity in recent years due to the improvement in solar panel technology and energy storage systems. In several places where the grid is not available, in ... -
Electrochemical Model and Sigma Point Kalman Filter Based Online Oriented Battery Model
Miguel, Eduardo; Lopetegi, Iker; Oca, Laura; IRAOLA, UNAI (IEEE, 2021)This paper presents a reduced-order electrochemical battery model designed for online implementation of battery control systems. This model is based on porous-electrode and concentratedsolution theory frameworks and is ...