eBiltegia

    • Zer da eBiltegia? 
    •   eBiltegiari buruz
    •   Argitaratu irekian zure ikerketa
    • Sarbide Irekia MUn 
    •   Zer da Zientzia Irekia?
    •   Mondragon Unibertsitatearen dokumentu zientifikoetara eta irakaskuntza-materialetara Sarbide Irekia izateko politika instituzionala
    •   Mondragon Unibertsitatearen ikerketa-datuetara Sarbide Irekia izateko Politika instituzionala
    •   Babes digitalerako jarraibideak
    •   Zure argitalpenak jaso eta zabaldu egiten ditu Bibliotekak
    • Euskara
    • Español
    • English

Laguntzailea:

  • Kontaktua
  • Euskara 
    • Euskara
    • Español
    • English
  • eBiltegia buruz  
    • Zer da eBiltegia? 
    •   eBiltegiari buruz
    •   Argitaratu irekian zure ikerketa
    • Sarbide Irekia MUn 
    •   Zer da Zientzia Irekia?
    •   Mondragon Unibertsitatearen dokumentu zientifikoetara eta irakaskuntza-materialetara Sarbide Irekia izateko politika instituzionala
    •   Mondragon Unibertsitatearen ikerketa-datuetara Sarbide Irekia izateko Politika instituzionala
    •   Babes digitalerako jarraibideak
    •   Zure argitalpenak jaso eta zabaldu egiten ditu Bibliotekak
  • Hasi saioa
Ikusi itema 
  •   eBiltegia MONDRAGON UNIBERTSITATEA
  • Ikerketa-Artikuluak
  • Artikuluak-Ingeniaritza
  • Ikusi itema
  •   eBiltegia MONDRAGON UNIBERTSITATEA
  • Ikerketa-Artikuluak
  • Artikuluak-Ingeniaritza
  • Ikusi itema
JavaScript is disabled for your browser. Some features of this site may not work without it.
Thumbnail
Ikusi/Ireki
Effect of surface integrity generated by machining on isothermal low cycle fatigue performance of Inconel 718.pdf (1.054Mb)
Erregistro osoa
Eragina

Web of Science   

Google Scholar
Partekatu
EmailLinkedinFacebookTwitter
Gorde erreferentzia
Mendely

Zotero

untranslated

Mets

Mods

Rdf

Marc

Exportar a BibTeX
Izenburua
Effect of surface integrity generated by machining on isothermal low cycle fatigue performance of Inconel 718
Egilea
Madariaga, Aitor
Garay, Ainara
Esnaola, Jon Ander
ARRAZOLA, PEDRO JOSE
Egilea (beste erakunde batekoa)
Linaza, Arantza
Ikerketa taldea
Mecanizado de alto rendimiento
Beste instituzio
ITP Aero
Bertsioa
Postprinta
Sarbidea
Sarbide bahitua
URI
https://hdl.handle.net/20.500.11984/5607
Argitaratzailearen bertsioa
https://doi.org/10.1016/j.engfailanal.2022.106422
Non argitaratua
Engineering Failure Analysis  .Vol. 137. N. artículo 106422, 2022
Argitaratzailea
Elsevier Ltd.
Gako-hitzak
Fatigue
Surface Integrity
X-ray analysis
Nickel alloy ... [+]
Fatigue
Surface Integrity
X-ray analysis
Nickel alloy
Machining [-]
Laburpena
Critical aero-engine components such as turbine discs must withstand severe cyclic stresses, which can eventually lead to low cycle fatigue (LCF) failures. These components are made of difficult-to-cu ... [+]
Critical aero-engine components such as turbine discs must withstand severe cyclic stresses, which can eventually lead to low cycle fatigue (LCF) failures. These components are made of difficult-to-cut alloys and machining conditions that are employed in the last stage of the manufacturing chain must be correctly defined to avoid the generation of an adverse surface condition (tensile residual stresses, excessive surface roughness or microstructural defects) that will accelerate fatigue failure. The analysis presented in this paper is aimed at understanding the isothermal LCF behaviour of turned Inconel 718 workpieces and finding quantitative correlations with the surface integrity. For this purpose, two Inconel 718 forged discs were face turned at cutting conditions employed in the aero-engine manufacturing industry using two different tools (1.2 mm and 4 mm nose radius respectively). The surface integrity produced by the face turning process was characterised in both discs: surface topography, residual stresses and surface layer anomalies. Specimens extracted from both discs were tested in load control at 450 ◦C to obtain LCF fatigue behaviour. Importantly, interrupted isothermal LCF fatigue tests were conducted and residual stresses were measured by the X-ray diffraction technique at the surface of the tested specimens to study the role of residual stresses in the LCF fatigue behaviour. For the tested conditions, the specimens machined with 4 mm nose radius showed 1.3–1.4 times longer fatigue lives than the specimens turned with 1.2 mm nose radius. These results are in agreement with the better surface integrity generated with the 4 mm nose radius, mainly because it induced lower tensile residual stresses. A novel local approach was implemented to understand the influence of surface integrity (surface roughness, surface residual stresses and altered stress-strain properties of the surface layer) on the isothermal LCF fatigue behaviour of both machined discs. Interestingly, a satisfactory correlation was found between the maximum applied stress in the surface layer and the isothermal LCF fatigue life employing the local approach. [-]
Sponsorship
Gobierno Vasco
Projectu ID
info:eu-repo/grantAgreement/GV/Elkartek 2019/KK-2019-00077/CAPV/Superficies multifuncionales en la frontera del conocimiento/FRONTIERS V
Bildumak
  • Artikuluak - Ingeniaritza [735]

Zerrendatu honako honen arabera

eBiltegia osoaKomunitateak & bildumakArgitalpen dataren araberaEgileakIzenburuakMateriakIkerketa taldeakNon argitaratuaBilduma hauArgitalpen dataren araberaEgileakIzenburuakMateriakIkerketa taldeakNon argitaratua

Nire kontua

SartuErregistratu

Estatistikak

Ikusi erabilearen inguruko estatistikak

Nork bildua:

OpenAIREBASERecolecta

Nork balioztatua:

OpenAIRERebiun
MONDRAGON UNIBERTSITATEA | Biblioteka
Kontaktua | Iradokizunak
DSpace
 

 

Nork bildua:

OpenAIREBASERecolecta

Nork balioztatua:

OpenAIRERebiun
MONDRAGON UNIBERTSITATEA | Biblioteka
Kontaktua | Iradokizunak
DSpace