Bilatu
279-tik 241-250 emaitza erakusten
Post-forming, electro-plastic effect internal stress reduction in AA5754 aluminium alloy
(Elsevier, 2022)
Aluminium alloys are one of the most efficient materials for weight reduction in the car industry. However, the favourable performance of alloys conflicts with the difficulties of transforming these materials through plastic ...
Li-ion Battery-based Hybrid Diesel-Electric Railway Vehicle: In-depth Life Cycle Cost Analysis
(IEEE, 2022)
In this study, the life cycle costs of railway projects involving hybrid diesel-electric vehicles are analysed. Specifically, the analysis focuses on the comparison of 3 lithium-ion battery technologies (NMC, LTO and LFP) ...
The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles
(Elsevier, 2021)
The present study has analysed the effect of cross-section geometry and the printing pattern of continuous carbon reinforced polyamide on the axial and radial crushing behaviour. Each geometry and printing pattern generated ...
Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres
(Elsevier, 2021)
The present paper investigates the suitability of cFF printed material and technologies for crashworthiness applications. To this end, the quasi-static and dynamic crush behaviour of 3D printed thin-walled hollow profiles ...
Circular economy business models and technology management strategies in the wind industry: Sustainability potential, industrial challenges and opportunities
(Elsevier, 2022)
Circular business models, aimed at narrowing, slowing, and closing resource loops, can potentially generate significant economic and social benefits, promote resource security and improve environmental performance. However, ...
FTIR as a Powerful Tool for Measurements of Diffusion in Supercritical Carbon Dioxide Using Taylor Dispersion Method
(MDPI, 2022)
A new experimental high-pressure setup for measuring diffusion coefficients in supercritical fluids, based on Taylor dispersion method, and using an FTIR detector to operate up to 25.0 MPa was designed and optimized. Tracer ...
Reflection through Diffraction: Interdisciplinarity in Energy Science
(Addleton Academic Publishers, 2022)
To address the complexities associated with transitioning towards sustainable energy solutions, there are increasing demands to employ interdisciplinary approaches. However, these still represent a minority of research ...
Pattern selection for convective flow in a liquid bridge subjected to remote thermal action
(AIP Publishing, 2022)
The stability of thermocapillary/buoyant flows is affected by a remote thermal source. We present a nonlinear two-phase computational study of convection in a liquid bridge that develops under the action of Marangoni and ...
Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V
(Trans Tech Publications, 2022)
The reliability of the pertinent parameters set of Johnson-Cook constitutive model is highly linked with the friction condition at the tool-chip-workpiece interface. In the present work, a study on the influence of Coulomb’s ...
Soft sensing force measurement approach in sheet metal forming facilities
(IOP Publishing, 2020)
Process stability and facility security are the two main purposes for measuring the force in sheet metal forming facilities. These two purposes look for guaranteeing the good health of the facility avoiding overloads and ...