Search
Now showing items 81-90 of 182
Drawbead uplift force analytical model for deep drawing operations
(IOP Publishing Ltd., 2018)
Drawbead uplift force calculation has been an open issue among the deep drawing tool maker and software developers in the last years. Starting from the original work of Stoughton (1988) many have been the models presented ...
Influencia del agua de mar en el comportamiento frente a impacto de baja energía de un nuevo laminado de resina natural reforzada con fibra de fique colombianoInfluence of seawater immersion in low energy impact behavior of a novel colombian fique fiber reinforced bio-resin laminate
(Universidad Nacional de Colombia, 2015)
This experimental work is aimed at the influence of seawater immersion in low impact energy behavior of a novel Colombian fique fiber reinforced bio-resin laminate. Such material was manufactured by vacuum infusion. The ...
Three stage maturity model in SME's towards Industry 4.0
(Universitat Politecnica de Catalunya, 2016)
Purpose: To address the challenges regarding the concept of Industry 4.0 and the diversification methodology and based on the strategic guidance towards Industry 4.0, we propose a process model as a guiding framework for ...
A neural-visualization IDS for honeynet data
(World Scientific, 2012)
Neural intelligent systems can provide a visualization of the network traffic for security staff, in order to reduce the widely known high false-positive rate associated with misuse-based Intrusion Detection Systems (IDSs). ...
Adaptive coatings based on polyaniline for direct 2D observation of diffusion processes in microfluidic systems
(Elsevier, 2016)
Microfluidic devices are poised to dramatically influence the future of the process industry. Therefore the understanding and proper evaluation of the flow and mixing behaviour at microscale becomes a very important issue. ...
Factor graph based detection approach for high-mobility OFDM systems with large FFT modes
(Springer, 2012)
In this article, a novel detector design is proposed for orthogonal frequency division multiplexing (OFDM) systems over frequency selective and time varying channels. Namely, we focus on systems with large OFDM symbol ...
Evolution of residual stresses induced by machining in a Nickel based alloy under static loading at room temperature
(Elsevier, 2014)
Tensile residual stresses are very often generated on the surface when machining nickel alloys. In order to determine their influence on the final mechanical behaviour of the component residual stress stability should be ...
Numerical Simulation of Surface Modification During Machining of Nickel-based Superalloy
(Elsevier, 2015)
The main objective of this study is to implement a reliable FE model of the orthogonal machining of a Nickel based superalloy for the prediction of microstructural changes occurring during the process. A FE numerical model ...
Simulation of distortion due to machining of thin-walled components
(Elsevier, 2013)
The distortion of components is strongly related to the residual stress state induced by manufacturing processes like heat treatment, forming or machining. Each process step affects the initial stress state of the following ...
Determination of the molecular diffusion coefficients in ternary mixtures by the sliding symmetric tubes technique
(AIP Publishing, 2014)
A new analytical methodology has been developed to determine the diagonal and cross-diagonal molecular diffusion coefficients in ternary mixtures by the Sliding Symmetric Tubes technique. The analytical solution is tested ...