Zerrendatu Artikuluak-Ingeniaritza honen arabera: izenburua
604-tik 176-195 emaitza erakusten
-
Effect of the crucible composition on the Inconel 718 vacuum induction melting process efficiency
(Elsevier, 2023)Nickel-based superalloys are widely employed to manufacture aero-engine turbines due to their high mechanical strength and resistance to corrosion and creep. Vacuum Induction Melting (VIM) is a suitable manufacturing ... -
Effect of Tool Geometry and LCO2 Cooling on Cutting Forces and Delamination when Drilling CFRP Composites Using PCD Tools
(Elsevier, 2022)Lightweight materials like Carbon Fiber Reinforced Polymers (CFRPs) present certain challenges, mainly regarding the resultant surface integrity of the holes. Different techniques such as optimized tool geometries, machining ... -
Effect of voids on the impact properties of Non-Crimp fabric carbon/epoxy laminates manufactured by liquid composite Moulding
(Elsevier, 2022)A great effort has been made to quantify the detrimental effect of voids on CFRP, nevertheless, the effect on impact properties has been barely studied and when it has been considered, it has always been for prepeg materials ... -
Effectivity of fluoride treatment on hydrogen and corrosion product generation in temporal implants for different magnesium alloys
(Sage Journals, 2013)The increasing interest on magnesium alloys relies on their biocompatibility, bioabsorbility and especially on their mechanical properties. Due to these characteristics, magnesium alloys are becoming a promising solution ... -
Effects of Different Si Content and Thermal Stories on the Secondary Phase Formation, Hot Ductility, and Stress Rupture Properties of Alloy 718 Investment Castings
(Springer, 2023)Herein, the effects of microstructure on high-temperature properties (hot ductility and stress rupture life) were investigated in alloy 718 investment castings manufactured with different Si contents (0.051, 0.11, and 0.17 ... -
Effects of manufacturing tolerances of permanent magnets in fractional slot permanent magnet synchronous machines
(IET, 2019)The fractional slot permanent magnet synchronous machines are well-known for their low torque ripple. However, in mass-production machines, not all the permanent magnets are identical due to the manufacturing tolerances ... -
Efficient Calculation of Stabilization Parameters in RF Power Amplifiers
(IEEE, 2020)This paper proposes an efficient method for the calculation of the stabilization parameters in RF power amplifiers operating in periodic large-signal regimes. Stabilization is achieved by applying the principles of linear ... -
Elastic behaviour characterisation of TRIP 700 steel by means of loading-unloading tests
(Elsevier Ltd., 2015)The elastic behaviour of TRIP 700 steel under plastic deformation is analysed. The analysis is carried out by means of classical tensile test and loading–unloading cyclic tests. These tests have been performed using high ... -
Electric Technology in Wind Turbines from a Dialectic Perspective
(Philosophy Documentation Center, 2019)Wind turbines have been used by many groups of humans for many centu-ries. Wind turbines have allowed groups of humans to perform many different tasks in the past (grinding grain, pumping water, etc.). However, ... -
Electric Vehicle Inverter Electro-Thermal Models Oriented to Simulation Speed and Accuracy Multi-Objective Targets
(MDPI AG, 2019)With the increasing demand for electric vehicles, the requirements of the market are changing ever faster. Therefore, there is a need to improve the electric car’s design time, where simulations could be an appropriate ... -
Electrochemical Model and Sigma Point Kalman Filter Based Online Oriented Battery Model
(IEEE, 2021)This paper presents a reduced-order electrochemical battery model designed for online implementation of battery control systems. This model is based on porous-electrode and concentratedsolution theory frameworks and is ... -
Electromechanical Properties of PVDF-Based Polymers Reinforced with Nanocarbonaceous Fillers for Pressure Sensing Applications
(MDPI AG, 2019)Polymer-based composites reinforced with nanocarbonaceous materials can be tailored for functional applications. Poly(vinylidene fluoride) (PVDF) reinforced with carbon nanotubes (CNT) or graphene with different filler ... -
Employee Satisfaction in Labor-Owned and Managed Workplaces: Helping Climate and Participation Spillover to Non-Owners
(MDPI, 2021)In contrast to shareholder-owned organizations, worker-owned cooperative organizations foster employee wellbeing such as employee satisfaction as an important outcome by itself. Due to expansions and economic fluctuations, ... -
End-over-end (EoE) rotation of toroidal cans: An experimentally validated mathematical modelling study
(Elsevier, 2024)Toroidal cans have been presented recently to improve the canning process efficiency, and previous studies focused on static and axial rotational processes. End-over-End (EoE) rotation is a significant agitation approach ... -
Entrepreneurs' perceptions of their entrepreneurial process: a qualitative analysis of in-depth interviews with Education graduates in the Basque Country, Spain
(InderScience, 2022)Entrepreneurship is necessary for the economic development of societies. Universities play a key role in this process by fostering entrepreneurship and promoting entrepreneurial skills. Studies show that entrepreneurship ... -
Equivalence of primary control strategies for AC and DC microgrids
(MDPI, 2017)Microgrid frequency and voltage regulation is a challenging task, as classical generators with rotational inertia are usually replaced by converter-interfaced systems that inherently do not provide any inertial response. ... -
Error estimation in current noisy quantum computers
(Springer Nature, 2024)One of the main important features of the noisy intermediate-scale quantum (NISQ) era is the correct evaluation and consideration of errors. In this paper, we analyse the main sources of errors in current (IBM) quantum ... -
Estimación cualitativa de la rugosidad mediante algoritmos de aprendizaje automático en una operación de taladrado
(Federación de Asociaciones de Ingenieros Industriales de España, 2020) -
Evaluating Disruptive Innovation Project Management Capabilities
(MDPI, 2021)Firms must adapt to a business environment in constant flux. Economic and political factors and the constant interruption of new technologies force firms and organizations to change and to adapt, so that they are not left ... -
Evaluation of 5G Modulation Candidates WCP-COQAM, GFDM-OQAM, and FBMC-OQAM in Low-Band Highly Dispersive Wireless Channels
(Hindawi, 2017)We analyse some of the candidates for modulations for 5G: FBMC-OQAM, GFDM-OQAM, and WCP-COQAM. Unlike most of the related bibliographies, which are oriented to mobile communications, our research is focused on 5G in cognitive ...
