Search
Now showing items 1-10 of 28
The influence of the kinematic hardening on the FEM simulation of Tension Levelling Process
(Elsevier Ltd., 2020)
Tension levelling is used in the steel industry to remove shape defects present in cold rolled strip. This technology is increasingly being employed by steel makers to level AHSS steels, because conventional roll levelers ...
Numerical simulation of U-Drawing test of Fortiform 1050 steel using different material models
(Elsevier Ltd., 2017)
Steel has been used in vehicles from the automotive industry's inception. Different steel grades are continually being developed
in order to satisfy new fuel economy requirements. For example, advanced high ...
Press hardening of alternative materials: conventional high- strength steels
(Springer Nature, 2017)
he increase in strength of new high strength steels(HHS) and advanced high strength steels (AHHS) has led toforming issues, such as high springback, low formability, increase of forming forces and tool wear. These problems ...
U-drawing of Fortiform 1050 third generation steels. Numerical and experimental results
(IOP Publishing Ltd, 2017)
Elasto–plastic behavior of the third generation Fortiform 1050 steel has been analysed using cyclic tension–compression tests. At the same time, the pseudo elastic modulus evolution with plastic strain was analysed using ...
Study on the influence of the springback on the hole expansion ratio characterization
(Whioce Publishing, 2018)
Material formability has become one of the main problems, together with the springback, when stamping high
added-value components for the automotive industry. The pursuit of weight reduction has led to higher strength ...
Numerical simulation of the roll levelling of third generation fortiform 1050 steel using a nonlinear combined hardening material model
(IOP Publishing Ltd, 2017)
Elasto–plastic behavior of the third generation Fortiform 1050 steel has been analysed using cyclic tension–compression tests. At the same time, the pseudo elastic modulus evolution with plastic strain was analysed using ...
A review of the effects of cyclic contact loading on fretting fatigue behaviour
(Sage Publishing Ltd., 2020)
A damage phenomenon called fretting fatigue frequently takes place when two contact bodies are clamped together under a normal contact load along with a small-scale oscillatory motion due to cyclic loading. In contrast to ...
Towards the automation of the die spotting process: Contact blue pattern decryption
(Elsevier Ltd., 2020)
Automotive die spotting is one of the most complex and least standardized processes in the tool making process. A spotting expert identifies local contact areas through a blue-paste pattern and the die/sheet contact is ...
Plasticity evolution of an aluminum-magnesium alloy under abrupt strain path changes
(Springer, 2022)
During the forming and manufacturing of engineering materials, plasticity behavior could be evolving significantly due to complex deformation history. Therefore, this study aims to characterize the plasticity evolution of ...
In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel
(Elsevier, 2022)
Modeling the elastic behavior of dual-phase steels is complex due to the strain dependency of Young's modulus and high elastic nonlinearity. Since it is assumed that reasons for this are to be found in microstructural ...
