eBiltegia

    • Zer da eBiltegia? 
    •   eBiltegiari buruz
    •   Argitaratu irekian zure ikerketa
    • Sarbide Irekia MUn 
    •   Zer da Zientzia Irekia?
    •   Mondragon Unibertsitatearen dokumentu zientifikoetara eta irakaskuntza-materialetara Sarbide Irekia izateko politika instituzionala
    •   Mondragon Unibertsitatearen ikerketa-datuetara Sarbide Irekia izateko Politika instituzionala
    •   Babes digitalerako jarraibideak
    •   Zure argitalpenak jaso eta zabaldu egiten ditu Bibliotekak
    • Euskara
    • Español
    • English

Laguntzailea:

  • Kontaktua
  • Euskara 
    • Euskara
    • Español
    • English
  • eBiltegia buruz  
    • Zer da eBiltegia? 
    •   eBiltegiari buruz
    •   Argitaratu irekian zure ikerketa
    • Sarbide Irekia MUn 
    •   Zer da Zientzia Irekia?
    •   Mondragon Unibertsitatearen dokumentu zientifikoetara eta irakaskuntza-materialetara Sarbide Irekia izateko politika instituzionala
    •   Mondragon Unibertsitatearen ikerketa-datuetara Sarbide Irekia izateko Politika instituzionala
    •   Babes digitalerako jarraibideak
    •   Zure argitalpenak jaso eta zabaldu egiten ditu Bibliotekak
  • Hasi saioa
Bilatu 
  •   eBiltegia MONDRAGON UNIBERTSITATEA
  • Ikerketa-Artikuluak
  • Bilatu
  •   eBiltegia MONDRAGON UNIBERTSITATEA
  • Ikerketa-Artikuluak
  • Bilatu
JavaScript is disabled for your browser. Some features of this site may not work without it.

Bilatu

Show Advanced FiltersHide Advanced Filters

Iragazkiak

Muga ezazu bilaketa iragazkiak erabiliz

15-tik 1-10 emaitza erakusten

  • Sort Options:
  • Relevance
  • Title Asc
  • Title Desc
  • Issue Date Asc
  • Issue Date Desc
  • Results Per Page:
  • 5
  • 10
  • 20
  • 40
  • 60
  • 80
  • 100
Thumbnail

Surface Integrity When Machining Inconel 718 Using Conventional Lubrication and Carbon Dioxide Coolant 

Chaabania, Sana; ARRAZOLA, PEDRO JOSE; Madariaga, Aitor (Elsevier Ltd., 2020)
Surface integrity induced by machining process affects strongly the performance of functional products, for instance, the fatigue life as well as the resistance to stress corrosion cracking. Consequently, it is relevant ...
Thumbnail

Evolution of residual stresses induced by machining in a Nickel based alloy under static loading at room temperature 

Madariaga, Aitor; ARRAZOLA, PEDRO JOSE; Esnaola, Jon Ander (Elsevier, 2014)
Tensile residual stresses are very often generated on the surface when machining nickel alloys. In order to determine their influence on the final mechanical behaviour of the component residual stress stability should be ...
Thumbnail

Numerical Simulation of Surface Modification During Machining of Nickel-based Superalloy 

ARRAZOLA, PEDRO JOSE; Imaz Ciaran, Mikel; Rotella, Giovanna (Elsevier, 2015)
The main objective of this study is to implement a reliable FE model of the orthogonal machining of a Nickel based superalloy for the prediction of microstructural changes occurring during the process. A FE numerical model ...
Thumbnail

Simulation of distortion due to machining of thin-walled components 

ARRAZOLA, PEDRO JOSE (Elsevier, 2013)
The distortion of components is strongly related to the residual stress state induced by manufacturing processes like heat treatment, forming or machining. Each process step affects the initial stress state of the following ...
Thumbnail

Broaching: Cutting tools and machine tools for manufacturing high quality features in components 

ARRAZOLA, PEDRO JOSE (Elsevier Ltd., 2020)
Broaching is a unique machining process with high accuracy and surface quality, which is employed in massand batch production for the manufacture of components with highly complex geometries. It involves the use of ...
Thumbnail

Effect of surface integrity generated by machining on isothermal low cycle fatigue performance of Inconel 718 

Madariaga, Aitor; Garay, Ainara; Esnaola, Jon Ander; ARRAZOLA, PEDRO JOSE (Elsevier Ltd., 2022)
Critical aero-engine components such as turbine discs must withstand severe cyclic stresses, which can eventually lead to low cycle fatigue (LCF) failures. These components are made of difficult-to-cut alloys and machining ...
Thumbnail

Surface topography irregularities generated by broaching 

Ortiz-de-Zarate, Gorka; Madariaga, Aitor; ARRAZOLA, PEDRO JOSE (Elsevier Ltd., 2022)
Surface topography irregularities generated by broaching are analysed. Experimental tests were carried out on three workpiece materials: AISI 1045, Ti-6Al-4V, and Inconel 718, varying the cutting speed, rise per tooth, and ...
Thumbnail

Sensitivity analysis of the input parameters of a physical based ductile failure model of Ti-6Al-4V for the prediction of surface integrity 

Ortiz-de-Zarate, Gorka; Sela, Andrés; Madariaga, Aitor; ARRAZOLA, PEDRO JOSE (Elsevier Ltd, 2020)
In machining of Ti-6Al-4V, it is commonly reported the appearance of segmented chip produced by adiabatic shearing (at high cutting speeds) and lack of ductility (at low cutting speeds). Moreover, machining is a manufacturing ...
Thumbnail

Reduction of distortions in large aluminium parts by controlling machining-induced residual stresses 

Madariaga, Aitor; ARRAZOLA, PEDRO JOSE (Springer, 2018)
Large aluminium monolithic parts used in the aeronautic industry frequently show significant geometric distortions after the machining process. These distortions are the consequence of the initial residual stresses of the ...
Thumbnail

Microstructural aspects of the transition between two regimes in orthogonal cutting of AISI 1045 steel 

Saez de Buruaga, Mikel; Soler Mallol, Daniel; ARRAZOLA, PEDRO JOSE (Elsevier, 2018)
In depth understanding of tool-chip friction behavior is a significant aspect for tool wear performance in steels. In the present work attention has been paid to the strain mode of the chip section in contact with the rake ...
  • 1
  • 2

Zerrendatu honako honen arabera

eBiltegia osoaKomunitateak & bildumakArgitalpen dataren araberaEgileakIzenburuakMateriakIkerketa taldeakNon argitaratuaKomunitate hauArgitalpen dataren araberaEgileakIzenburuakMateriakIkerketa taldeakNon argitaratua

Nire kontua

SartuErregistratu

Arakatu

EgileaARRAZOLA, PEDRO JOSE (13)Madariaga, Aitor (7)Ortiz-de-Zarate, Gorka (5)CUESTA ZABALAJAUREGUI, MIKEL (3)Esnaola, Jon Ander (2)ARRAZOLA, PEDRO JOSE (1)Chaabania, Sana (1)CUESTA ZABALAJAUREGUI, MIKEL (1)Garay, Ainara (1)Garay, Ainara (1)... View MoreMateria
Machining (15)
Residual stress (4)Broaching (3)AISI 1045 (2)Distortions (2)Nickel alloy (2)Surface Integrity (2)Surface integrity (2)Aeronautics (1)Aerospace (1)... View MoreDate Issued2020 - 2024 (9)2013 - 2019 (6)Has File(s)Yes (15)

Nork bildua:

OpenAIREBASERecolecta

Nork balioztatua:

OpenAIRERebiun
MONDRAGON UNIBERTSITATEA | Biblioteka
Kontaktua | Iradokizunak
DSpace
 

 

Nork bildua:

OpenAIREBASERecolecta

Nork balioztatua:

OpenAIRERebiun
MONDRAGON UNIBERTSITATEA | Biblioteka
Kontaktua | Iradokizunak
DSpace