Buscar
Mostrando ítems 351-360 de 745
Comparative small-signal evaluation of advanced grid-forming control techniques
(Elsevier B.V., 2022)
This paper presents the small-signal modelling and analysis of the most recent grid-forming control techniques, namely the matching control (MC) and the dispatchable virtual oscillator (dVOC). These are compared to more ...
DBHko ikasleen iritzi-testuetako gaitasun diskurtsiboak langai
(Udako Euskal Unibertsitatea (UEU), 2019)
Egungo irakaskuntza-sistemak, elebidun orekatuak bermatzeko, ikasleen
komunikazio-gaitasuna erdietsi behar du. Helburua asebetetzeko, material didaktikoa
helburu horretara egokitzeaz gain, ikasgelako egiteko moduetan ...
Probabilistic forecasting informed failure prognostics framework for improved RUL prediction under uncertainty: A transformer case study
(Elsevier Ltd., 2022)
The energy transition towards resilient and sustainable power plants requires moving from periodic health assessment to condition-based lifetime planning, which in turn, creates new challenges and opportunities for health ...
Heat transferred to the workpiece based on temperature measurements by IR technique in dry and lubricated drilling of Inconel 718
(Elsevier, 2016)
In manufacturing aeronautical critical components, such as turbine discs commonly made of Inconel 718, surface integrity is crucial to ensure their fatigue life. Among the machining processes used, the drilling operation ...
Numerical study of the pressure drop phenomena in wound woven wire matrix of a Stirling regenerator
(Elsevier, 2013)
Friction pressure drop correlation equations are derived from a numerical study by characterizing the pressure drop phenomena through porous medium of both types namely stacked and wound woven wire matrices of a Stirling ...
Uncertainty of Temperature Measurements in Dry Orthogonal Cutting of Titanium Alloys
(Elsevier, 2015)
Infrared radiation thermometer is used to measure the temperature of tool during dry orthogonal cutting of titanium alloys. The accuracy of measured temperature depends on several parameters such as the experimental set-up, ...
A Note on Interpreting Tool Temperature Measurements from Thermography
(Taylor & Francis, 2015)
Thermography (thermal imaging) is a well-established experimental method for studying cutting tool temperature distributions. In one form, cutting edge temperatures within the chip / tool contact area are deduced from ...
Numerical study of the heat transfer in wound woven wire matrix of a Stirling regenerator
(Elsevier, 2014)
Nusselt number correlation equations are numerically derived by characterizing the heat transfer phenomena through porous medium of both stacked and wound woven wire matrices of a Stirling engine regenerator over a specified ...
Thermodiffusion in Ternary Mixtures of Water/Ethanol/Triethylene Glycol: First Report on the DCMIX3-Experiments Performed on the International Space Station
(Springer, 2018)
We report on thermodiffusion experiments conducted on the International Space Station ISS during fall 2016. These experiments are part of the DCMIX (Diffusion and thermodiffusion Coefficients Measurements in ternary Mixtures) ...