Bilatu
14-tik 1-10 emaitza erakusten
Numerical Simulation of Surface Modification During Machining of Nickel-based Superalloy
(Elsevier, 2015)
The main objective of this study is to implement a reliable FE model of the orthogonal machining of a Nickel based superalloy for the prediction of microstructural changes occurring during the process. A FE numerical model ...
Influencia del agua de mar en el comportamiento frente a impacto de baja energía de un nuevo laminado de resina natural reforzada con fibra de fique colombianoInfluence of seawater immersion in low energy impact behavior of a novel colombian fique fiber reinforced bio-resin laminate
(Universidad Nacional de Colombia, 2015)
This experimental work is aimed at the influence of seawater immersion in low impact energy behavior of a novel Colombian fique fiber reinforced bio-resin laminate. Such material was manufactured by vacuum infusion. The ...
Comparison of the hardening behaviour of different steel families : from mild and stainless steel to advanced high strength steels
(Elsevier Ltd., 2015)
Although steel has been used in vehicles from the automotive industry's inception, different steel gradesare continually being developed in order to satisfy new fuel economy requirements. For example,advanced high strength ...
Elastic behaviour characterisation of TRIP 700 steel by means of loading-unloading tests
(Elsevier Ltd., 2015)
The elastic behaviour of TRIP 700 steel under plastic deformation is analysed. The analysis is carried out by means of classical tensile test and loading–unloading cyclic tests. These tests have been performed using high ...
Uncertainty of Temperature Measurements in Dry Orthogonal Cutting of Titanium Alloys
(Elsevier, 2015)
Infrared radiation thermometer is used to measure the temperature of tool during dry orthogonal cutting of titanium alloys. The accuracy of measured temperature depends on several parameters such as the experimental set-up, ...
A Note on Interpreting Tool Temperature Measurements from Thermography
(Taylor & Francis, 2015)
Thermography (thermal imaging) is a well-established experimental method for studying cutting tool temperature distributions. In one form, cutting edge temperatures within the chip / tool contact area are deduced from ...
Hybrid ac/dc microgrids. Part I : Review and classification of topologies
(Elsevier, 2015)
Microgrids have been widely studied in the literature as a possible approach for the integration of distributed energy sources with energy storage systems in the electric network. Until now the most used configuration has ...
Diagnosis and new challenges on design. The case of Mondragon Corporation's industry areaDiagnóstico y nuevos retos del diseño industrial. El caso del área industrial de la Corporación Mondragón
(Elsevier Ltd, 2015)
La integración del diseño en los procesos de innovación conlleva una mejora de la competitividad. No obstante, investigaciones a nivel estatal indican que en la industria predomina todavía una visión estético-funcional del ...
Metal cutting experiments and modelling for improved determination of chip/tool contact temperature by infrared thermography
(Elsevier Ltd, 2015)
Temperature measurement in metal cutting at the chip and work contact is of central importance due to temperature dependence of tool wear and surface integrity. Infrared thermography is commonly employed to determine the ...
Eyeface : a new multimethod tool to evaluate the perception of conceptual user experiences
(Elsevier, 2015)
Based on the identification of a new multimethod tool necessity, a new tool called Eyeface has been created by combining two different devices: the Eye-tracking and the Facereader. This research work analyses a new multimethod ...