Bilatu
39-tik 11-20 emaitza erakusten
Uncut chip geometry determination for cutting forces prediction in orthogonal turn-milling operations considering the tool profile and eccentricity
(Elsevier Ltd., 2021)
The cutting forces generated in machining are responsible for the tool deflection, part distortion, and features as chatter; therefore, their accurate estimation is fundamental to defining stable and safe working conditions ...
Modeling of Drag Finishing: Influence of Abrasive Media Shape
(MDPI, 2021)
Drag finishing is a widely used superfinishing technique in the industry to polish parts under the action of abrasive media combined with an active surrounding liquid. However, the understanding of this process is not ...
In-SEM micro-machining reveals the origins of the size effect in the cutting energy
(Springer Nature, 2021)
High-precision metal cutting is increasingly relevant in advanced applications. Such precision normally requires a cutting feed in the micron or even sub-micron dimension scale, which raises questions about applicability ...
Experimental evaluation and surface integrity analysis of cryogenic coolants approaches in the cylindrical plunge grinding
(Nature Publishing Group, 2021)
Replacement of pollutant fuids with eco-friendly strategies in machining operations signifcantly contributes to protecting the environment, diminishing global warming, and ensuring a healthier workplace for employees. This ...
Sensor signal selection for tool wear curve estimation and subsequent tool breakage prediction in a drilling operation
(Taylor & Francis, 2021)
Tool condition monitoring have an important role in machining processes to reduce defective component and ensure quality requirements. Stopping the process before the tool breaks or an excessive tool wear is reached can ...
Roughness maps to determine the optimum process window parameters in face milling
(Elsevier Ltd., 2022)
Some industrial applications require structured surfaces with high roughness values to ensure their functionality (Ra > 1 µm, Rmax < 30 µm). In order to obtain these structured surfaces with high roughness values, face ...
Identification of the Parameter Values of the Constitutive and Friction Models in Machining Using EGO Algorithm: Application to Ti6Al4V
(MDPI, 2022)
The application of artificial intelligence and increasing high-speed computational performance is still not fully explored in the field of numerical modeling and simulation of machining processes. The efficiency of the ...
Sensitivity analysis of the input parameters of a physical based ductile failure model of Ti-6Al-4V for the prediction of surface integrity
(Elsevier Ltd, 2020)
In machining of Ti-6Al-4V, it is commonly reported the appearance of segmented chip produced by adiabatic shearing (at high cutting speeds) and lack of ductility (at low cutting speeds). Moreover, machining is a manufacturing ...
Influence of lubrication condition on the surface integrity induced during drag finishing
(Elsevier Ltd, 2020)
Tribofinishing is one of the most popular polishing process in industry. The action of small abrasive media around parts enables to reduce significantly surface roughness and at the same time, to induce compressive residual ...
Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion
(Elsevier Ltd, 2020)
Surface integrity directly affects the mechanical behavior of the workpiece, which is especially relevant on fatigue behavior. To characterize the quality of the machined surface, aspects such as material damage, roughness ...