Registro sencillo

dc.rights.licenseAttribution 4.0 International*
dc.contributor.authorFernandez de Arroiabe, Peru
dc.contributor.authorMartinez Agirre, Manex
dc.contributor.authorBou-Ali, M. Mounir
dc.contributor.otherMartínez Urrutia, Asier
dc.contributor.otherRamírez, Miguel
dc.date.accessioned2020-04-01T15:30:06Z
dc.date.available2020-04-01T15:30:06Z
dc.date.issued2018
dc.identifier.issn0140-7007en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=147898en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/1616
dc.description.abstractWetting surface is a very important issue for the design of absorption applications and heat exchangers. The contact angle is deemed essential in wettability studies; However, LiBr aqueous solution contact angle studies are limited. This work analyses the contact angle of LiBr aqueous solution in the range of 0–55% mass fraction on different material surfaces: copper, aluminum, stainless-steel and polytetrafluoroethylene (PTFE) under atmospheric conditions. A sessile drop technique was used for measuring the contact angles, and a linear relation between solution surface tension and contact angle is observed in the tested materials. The study of three metals show hydrophilic performance (θ < 90°), whereas the PTFE shows hydrophobic performance. Additionally, the effect of the selection of the material, and consequent effect on the contact angle, on the minimum wetting rate and film thicknesses is presented under the working conditions of the absorption technologies. From the wettability point of view, the results show that using stainless-steel and aluminum leads to a slightly better performance than a copper made heat exchanger.en
dc.description.sponsorshipUnión Europeaes
dc.description.sponsorshipGobierno Vascoes
dc.language.isoengen
dc.publisherElsevier Ltd.en
dc.rights© The Authorsen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectContact-angleen
dc.subjectSessile-drop-testen
dc.subjectAbsorption technologiesen
dc.subjectFalling-filmen
dc.subjectWettingen
dc.titleContact angle measurement for LiBr aqueous solutions on different surface materials used in absorption systemsen
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceInternational Journal of Refrigerationen
local.contributor.groupMecánica de fluidoses
local.description.peerreviewedtrueen
local.description.publicationfirstpage182en
local.description.publicationlastpage188en
local.identifier.doihttps://doi.org/10.1016/j.ijrefrig.2018.05.041en
local.relation.projectIDinfo:eu-repo/grantAgreement/EC/H2020/680738/EU/Industrial Energy and Environment Efficiency/Indus3Esen
local.relation.projectIDGV/Elkartek 2018/KK-2018-00022/CAPV/Diseño y fabricación de un captador de calor radiante residual en la industria/BEROAGO3en
local.relation.projectIDGV/Elkartek 2018/KK-2017-00089/CAPV/Microtecnologías como motor de desarrollo de microsistemas avanzados integrados en la fábrica inteligente Monitorización estructural y detección de sustancias bio-químicas en medios productivos/µ4Fen
local.rights.publicationfeeAPC
local.rights.publicationfeeamount1808 EUR
local.contributor.otherinstitutionhttps://ror.org/02fv8hj62es
local.source.detailsVol. 95. Pp. 182-188. 2019eu_ES
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_6501en
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85en


Ficheros en el ítem

Thumbnail
Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(es)

Registro sencillo

Attribution 4.0 International
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution 4.0 International