Bilatu
22-tik 1-10 emaitza erakusten
Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining
(Elsevier, 2015)
Ti6Al4 V is a titanium alloy widely used in the aeronautical industry and machining is often adopted to manufacture it. These parts must satisfy requirements specified by the customer. A crucial characteristic of aircraft ...
Machining behaviour of Ti-6Al-4V and Ti-5553 alloys in interrupted cutting with PVD coated cemented carbide
(Elsevier, 2012)
Machining behaviour of Ti-5553, Ti-6Al-4 V mill-annealed (MA) and Ti-6Al-4 V solution treated and aged (STA) alloys was studied in different interrupted cutting operations using PVD coated cemented carbide tools. Single ...
Surface machining condition and fatigue life on Inconel 718
(Elsevier, 2018)
Life assessment of components working in aero-engines at elevated temperatures is critical. Machining has a serious effect on these nickel-based alloys, for example in turbine discs, affecting their life in service. Machining ...
Effect of heat Treatment Conditions on the Machinability of Ti64 and Ti54 M Alloys
(Elsevier, 2012)
Orthogonal tests on cylindrical workpieces were carried out to analyze the effect of heat treatment on the machinability of newly developed Ti54M titanium alloy in comparison with Ti64. This paper focuses on the comparison ...
Finding correlations between tool life and fundamental dry cutting tests in finishing turning of steel
(Elsevier, 2015)
Tool life is usually measured by end tool life tests, however, such experiments are costly and time consuming. Establishing correlation between these tests and shorter and cheaper tests is consequently of great interest. ...
A comparative study of residual stress profiles on Inconel 718 induced by dry face turning
(Elsevier, 2011)
Residual stress profiles induced by different dry face turning conditions are compared employing X-ray diffraction method, Hole-Drilling method and Finite Element Modelling. It is well known that the surface integrity ...
Mechanical and electrical properties of additively manufactured copper
(IOP Publishing, 2021)
Additive Manufacturing (AM) has become the new paradigm of design and production strategies. While structural and functional materials are the most implemented ones, it is also possible to manufacture parts using precious ...
Influences of Cutting Speed and Material Constitutive Models on Chip Formation and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation
(2021)
The highly used Ti6Al4V alloy is a well know hard-to-machine material. The modelling of orthogonal cutting process of Ti6Al4V attract the interest of many researchers as it often generates serrated chips. The purpose of ...
Effect of innovative finishing operations on the tribological performance of steel 27MnCr5
(Elsevier Ltd., 2022)
Transmission shafts used in the automotive sector must have a good tribological performance, and therefore an enhanced surface integrity. This paper aims to study the effect of eco-friendly innovative finishing operations ...
Enhancing surface integrity of A7050-T7451 aluminium alloy by pneumatic machine hammer peening
(Elsevier Ltd., 2022)
Aerostructures withstand cyclic mechanical loads and therefore, their design must fulfil surface integrity and fatigue strength requirements. This paper studies the effect of pneumatic machine hammer peening on surface ...