Bilatu
4-tik 1-4 emaitza erakusten
Effect of heat Treatment Conditions on the Machinability of Ti64 and Ti54 M Alloys
(Elsevier, 2012)
Orthogonal tests on cylindrical workpieces were carried out to analyze the effect of heat treatment on the machinability of newly developed Ti54M titanium alloy in comparison with Ti64. This paper focuses on the comparison ...
Influences of Cutting Speed and Material Constitutive Models on Chip Formation and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation
(2021)
The highly used Ti6Al4V alloy is a well know hard-to-machine material. The modelling of orthogonal cutting process of Ti6Al4V attract the interest of many researchers as it often generates serrated chips. The purpose of ...
Development and experimental validation of a macroscopic analytical model aiming to generate metal-FRP stacks drilling cutting force and torque
(2021)
Composites materials and especially FRP are increasingly employed in many fields of applications (transport, aerospace, …) due to the current trend of improving global energy performances of new designs notably by mass ...
Zeharkako ebaketa prozesuaren parametroen eragina erresistentzia handiko altzairuzko xafla lodietan
(UEU, 2021)
Transversal cutting processes are usually employed for metal coil cutting or precut reduction operations. The final result of a cutting operation, in terms of sheared edge quality and process forces, is dependent on the ...