Now showing items 1-20 of 82

    • Analysis of different inhibitors for magnesium investment casting 

      Herrero Dorca, Nuria; Hurtado Hurtado, Iñaki; Arruebarrena Lizarralde, Miren Gurutze; Sarriegi Etxeberria, Haritz (IOP Publishing, 2011)
      Investment casting of magnesium is a well suited process for the production of aeronautic and automotive components. But still, this process has not been properly developed. One reason for that are the reactions between ...
    • Fluido magnetikoen portaera magneto-reologiko eta biskoelastikoa 

      Berasategui Arostegui, Joanes; Elejabarrieta Olabarri, María Jesús; Bou-Ali, M. Mounir; Garmendia, Izaro (Mondragon Unibertsitateko Zerbitzu Editoriala, 2012)
      Fluido magnetikoak likido eramaile eta partikula magnetikoez daude osatuta, eta beraien portaera aplikatutako eremu magnetikoaren menpekoa da. Lan honetan, olio mineralez, sufaktante batez, likatzaile batez eta partikula ...
    • Personalised Trachea Stent Designer: a Knowledge Feature 

      Ugarte Barrena, Done; Izaguirre Altuna, Alberto (Elsevier, 2012)
      Modelling of anatomical parts is usually tackled through triangulated models with specialised Bio-CAD applications. If features beyond anatomy are required, geometry is usually translated into NURBS geometry for further ...
    • Finding correlations between tool life and fundamental dry cutting tests in finishing turning of steel 

      Soler Mallol, Daniel; Aristimuño Osoro, Patxi Xabier; Arrazola Arriola, Pedro José; Garay Araiko, Ainara (Elsevier, 2015)
      Tool life is usually measured by end tool life tests, however, such experiments are costly and time consuming. Establishing correlation between these tests and shorter and cheaper tests is consequently of great interest. ...
    • On the Feasibility of Distinguishing Between Process Disturbances and Intrusions in Process Control Systems using Multivariate Statistical Process Control 

      Iturbe Urretxa, Mikel; Garitano Garitano, Iñaki; Zurutuza Ortega, Urko; Uribeetxeberria Ezpeleta, Roberto (IEEE, 2016)
      Process Control Systems (PCSs) are the operat-ing core of Critical Infrastructures (CIs). As such, anomalydetection has been an active research field to ensure CInormal operation. Previous ...
    • Vibration attenuation of conductive beams by inducing eddy currents 

      Irazu Echeverria, Leire; Elejabarrieta Olabarri, María Jesús (IOP, 2016)
      The increasing requirements for structural vibration control in many industries, require innovative attenuation techniques. In this work, the phenomenon of eddy currents is proposed to reduce the ...
    • Roll levelling semi-analytical model for process optimization 

      Silvestre Soriano, Elena; Galdos Errasti, Lander; Saénz de Argandoña Fernández de Gorostiza, Eneko; Mendiguren Olaeta, Joseba (IOP, 2016)
      Roll levelling is a primary manufacturing process used to remove residual stresses and imperfections of metal strips in order to make them suitable for subsequent forming operations. In the last years the importance of ...
    • Sensitivity analysis on an AC600 aluminum skin component 

      Mendiguren Olaeta, Joseba; Saénz de Argandoña Fernández de Gorostiza, Eneko; Galdos Errasti, Lander; Mugarra Fernandez, Endika (IOP, 2016)
      New materials are been introduced on the car body in order to reduce weight and fulfil the international CO2 emission regulations. Among them, the application of aluminum alloys is increasing for skin panels. Even if these ...
    • The transformation of society at the centre of a co-operative university’s mission 

      Altuna Iraola, Jon (UNIKE, 2016)
      Mondragon Unibertsitatea (MU) is a young university created in 1997 whose roots date back to 1943. MU is a non-profit worker-owned co-operative university, of public interest, and a member of MONDRAGON Corporation, with a ...
    • Cyber Physical System Based Proactive Collaborative Maintenance 

      Zurutuza Ortega, Urko; Uribeetxeberria Ezpeleta, Roberto (IEEE, 2016)
      The aim of the MANTIS project is to provide a proactive maintenance service platform architecture based on Cyber Physical Systems. The platform will allow estimating future performance, predicting and preventing imminent ...
    • Stability and parking cross distance adapter mechanism for electric vehicle 

      Izquierdo Ortiz de Landaluce, Mikel; Ulacia Garmendia, Ibai (2017 EAEC European Automotive Congress, 2017)
      Due to the actual vehicle dimensions, low occupancy rates and the increase of world population, a trend to develop new vehicle concepts with smaller dimensions is seen. The objective of this trend is to reduce traffic ...
    • The Way Cyber Physical Systems Will Revolutionise Maintenance 

      Zurutuza Ortega, Urko (CISTER Research Center, 2017)
      The way maintenance is carried out is altering rapidly. The introduction of Cyber Physical Systems (CPS) and cloud technologies are providing new technological possibilities that change dramatically the way it is possible ...
    • Software Defined Networking Opportunities for Intelligent Security Enhancement of Industrial Control Systems 

      Sainz Oruna, Mikel; Iturbe Urretxa, Mikel; Garitano Garitano, Iñaki; Zurutuza Ortega, Urko (Springer International Publishing, 2017)
      In the last years, cyber security of Industrial Control Systems (ICSs) has become an important issue due to the discovery of sophisticated malware that by attacking Critical Infrastructures, could cause catastrophic safety ...
    • Análisis Numérico del Efecto de la Termoforesis para la Separación de Diferentes Poblaciones de Exosomas 

      Aginagalde Unanue, Maialen; Martín Mayor, Alain; Bou-Ali, M. Mounir; Errarte Yarza, Ane (Servicio Editorial de la Universidad del País Vasco, 2017)
      Los sistemas microfluídicos han demostrado ser una alternativa prometedora ante procesos convencionales de separación y caracterización. Este trabajo muestra el estudio numérico del fenómeno de la termoforesis en un ...
    • Sustainability analysis on Urban Mobility based on Social Media content 

      Serna Nocedal, Ainhoa; Bernabe Artola, Unai (Elsevier B.V., 2017)
      Urban transport became an important element in the promotion of strategies towards sustainability, in fact one of the challenges posed by booming urban populations is the question of mobility. Traditional travel survey ...
    • Hacia un modelo cuantitativo de Personas 

      González de Heredia López de Sabando, Arantxa; Justel Lozano, Daniel; Iriarte Azpiazu, Ion; Beitia Amondarain, Amaia (AEIPRO, 2018)
      La herramienta Personas es una herramienta extendida en el mundo del diseño de producto y el diseño web. En los últimos años nuevas disciplinas como el diseño de servicios y el diseño estratégico han hecho que las herramientas ...
    • Personas for policy-making and healthcare design 

      González de Heredia López de Sabando, Arantxa; Justel Lozano, Daniel; Iriarte Azpiazu, Ion (University of Zagreb, 2018)
      The tool Personas has been used by different research teams to represent diversity among elderly people. This tool has been widely used in the discipline of product and service design and in recent years has spread to other ...
    • The use of areal surface topography characterisation in relation to fatigue performance 

      Zabala Eguren, Alaitz; Llavori Osa, Iñigo; Tato Vega, Wilson; Aginagalde Lopez, Andrea; Gómez Rodríguez, Xabier (EDP Sciences, 2018)
      Although the effect of surface topography on fatigue life is widely accepted, the underlying role of surface roughness from first principles is still poorly understood. Currently approaches which consider the ...
    • Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion 

      Sáenz Domínguez, Iván; Tena Merino, Iosu; Esnaola Arruti, Aritz; Sarrionandia Ariznabarreta, Mª Asun; Aurrekoetxea Narbarte, Jon (2018)
      This paper analyses the axial crushing behaviour and flexural properties of novel unsaturated polyester (UP) and vinyl ester (VE) composites, manufactured by out of die ultraviolet (UV) cured pultrusion. The relation between ...
    • Effect of alumina tri-hydrate filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites 

      Tena Merino, Iosu; Sáenz Domínguez, Iván; Sarrionandia Ariznabarreta, Mª Asun; Aurrekoetxea Narbarte, Jon (2018)
      This research study is focused on the effect of alumina tri-hydrate (ATH) filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites. In particular, vinyl ester formulations ...