Título
New Calibration method to measure Rake Face Temperature of the tool during Dry Orthogonal Cutting using ThermographyAutor-a
Grupo de investigación
Mecanizado de alto rendimientoFecha de publicación
2018Editor
Elsevier Ltd.Palabras clave
Temperature measurementInfrared thermography
Metal cutting
Orthogonal cutting
Resumen
A new method for measuring temperature in the rake face of a tool during dry orthogonal cutting using ther-
mography is presented. In addition, a new technique is also used to calibrate the infrared ... [+]
A new method for measuring temperature in the rake face of a tool during dry orthogonal cutting using ther-
mography is presented. In addition, a new technique is also used to calibrate the infrared camera. Using this
technique, real temperature values from camera response are directly obtained without the need for emissivity
correction. Emissivity is thus not an uncertainty source. These techniques were applied to machining AISI 4140.
Rake face temperatures are reported and correlation with cutting forces outlined. The set-up effectively showed
temperature distribution on the rake face. [-]
Versión del editor
https://doi.org/10.1016/j.applthermaleng.2018.03.056ISSN
1359-4311Publicado en
Applied Thermal Engineering Vol. 137. Pp. 74-82. 5 June,Tipo de documento
ArtículoVersión
Postprint – Accepted ManuscriptDerechos
© 2018 Elsevier Ltd.Acceso
Acceso embargado (hasta 2020-04-01)Colecciones
- Artículos - Ingeniería [182]