Bilatu
912-tik 861-870 emaitza erakusten
Simple and Affordable Method for Fast Transient Measurements of SiC Devices
(IEEE, 2020)
The measurement of fast voltage and current transients of Silicon Carbide (SiC) devices requires high bandwidth (BW) probes. Commercially available voltage and current probes can be expensive, and, in addition, the delay ...
Análisis del efecto de shot-peening y el cementado en la vida a fatiga de los engranajes
(Sociedad Española de Integridad Estructural - Grupo Español de Fractura SEIE-GEF, 2023)
Debido a sus condiciones de trabajo, la fatiga es uno de los modos de fallo más comunes en los engranajes. A pesar de que habitualmente se emplean diversos tratamientos para mejorar las propiedades mecánicas de los mismos, ...
Analytical, FEM and Experimental Study of the Influence of the Airgap Size in Different Types of Ferrite Cores
(IEEE, 2022)
This work reviews and compares different airgap reluctance calculation approaches with experimental results, focusing on the Schwarz-Christoffel transformation. The modelling of the airgap reluctance in two dimensions is ...
Novel Analytical Method for Estimating the Junction-to-Top Thermal Resistance of Power MOSFETs
(IEEE, 2022)
This papers proposes a new methodology for estimating the thermal resistance from the junction-to-top capsule surface. By placing the transistor in a vertical position, without being soldered to any PCB, and sensing the ...
Fabrikazio mekanizatuaren erronkakLos retos de la fabricación mecanizada
(ETB - Elhuyar, 2023)
Damping characterisation of an elevator rope
(ISMA, 2022)
The ropes of an elevator transmit the vibrations from the motor to the elevator car, and consequently have a great influence on comfort. Therefore, it is of major interest to analyse the dynamic behaviour of these elements. ...
Noise attenuation prediction and analysis in rectangular lined ducts
(ISMA, 2022)
The noise of Heating, Ventilating and Air Conditioning (HVAC) systems is an important aspect when the comfort of the users is compromised. Thus, solutions to attenuate that noise need to be proposed. Linings in ducts are ...
An analytical model of through-thickness photopolymerisation of composites: Ultraviolet light transmission and curing kinetics
(Elsevier, 2020)
In this paper, a kinetic model able to predict the evolution of the through-thickness degree of cure of ultraviolet (UV) cured composites has been developed and validated. The kinetic model, which is based on the autocatalytic ...
Development of a novel method to characterize mean surface peak curvature as a signature of tribological performance of dental implant surfaces
(IOP Publishing, 2020)
The integrity of dental implant surfaces might be compromised during surgical insertion. Wear and topographical modifications can occur during implant insertion, which can potentially have clinical implications. Accordingly, ...
Mondragon ZTIM-HUB: the collaborative network for the development of stem vocations
(2022)
It is well known that STEM (Science, Technology, Engineering & Mathematics) is one of the most heard concepts both in the field of education and in the business sphere, when talking about the socio-economic needs of the ...