Artikuluak-Ingeniaritza: Azken bidalketak
736-tik 641-660 emaitza erakusten
-
MODDALS Methodology for Designing Layered Ontology Structures
(IOS Press, 2020)Global ontologies include common vocabularies to provide interoperability among different applications. These ontologies require a balance of reusability-usability to minimise the ontology reuse effort in different ... -
Monitoring of a Hammer Forging Testing Machine for High-Speed Material Characterization
(Elsevier Ltd., 2020)Dynamic testing of materials is necessary to model high-speed forming processes (i.e. hammer forging, blanking) and crash/impact behavior of structures, among others. The most common machines to perform medium to high-speed ... -
The influence of the kinematic hardening on the FEM simulation of Tension Levelling Process
(Elsevier Ltd., 2020)Tension levelling is used in the steel industry to remove shape defects present in cold rolled strip. This technology is increasingly being employed by steel makers to level AHSS steels, because conventional roll levelers ... -
DABGEO: a Reusable and Usable Global Energy Ontology for the Energy Domain
(Elsevier B.V.Ontology usability, 2020)The heterogeneity of energy ontologies hinders the interoperability between ontology-based energymanagement applications to perform a large-scale energy management. Thus, there is the need fora global ontology that provides ... -
Continuous improvement framework to develop cultural change: case study, capital goods company
(Emerald Publishing Limited, 2020)In this study, a frame of reference was developed to adapt and execute a continuous improvement process (CIP) for reinforcing a continuous improvement (CI) culture in an organisation. The study was undertaken in a mature ... -
Influencia del agua de mar en el comportamiento frente a impacto de baja energía de un nuevo laminado de resina natural reforzada con fibra de fique colombiano
(Universidad Nacional de Colombia, 2015)This experimental work is aimed at the influence of seawater immersion in low impact energy behavior of a novel Colombian fique fiber reinforced bio-resin laminate. Such material was manufactured by vacuum infusion. The ... -
An all-in-one numerical methodology for fretting wear and fatigue life assessment
(Gruppo Italiano Frattura, 2016)Many mechanical components such as, bearing housings, flexible couplings and spines or orthopedic devices are simultaneously subjected to a fretting wear and fatigue damage. For this reason, the combined study on a single ... -
Three stage maturity model in SME's towards Industry 4.0
(Universitat Politecnica de Catalunya, 2016)Purpose: To address the challenges regarding the concept of Industry 4.0 and the diversification methodology and based on the strategic guidance towards Industry 4.0, we propose a process model as a guiding framework for ... -
Project-based collaborative engineering learning to develop Industry 4.0 skills within a PLM framework
(Elsevier B.V., 2017)Training and learning methods for engineering students, in the disciplines of product design and manufacturing, are becoming more difficult and complex since they have to integrate theoretical technical knowledge, skills ... -
Equivalence of primary control strategies for AC and DC microgrids
(MDPI, 2017)Microgrid frequency and voltage regulation is a challenging task, as classical generators with rotational inertia are usually replaced by converter-interfaced systems that inherently do not provide any inertial response. ... -
Low Cost Photonic Sensor for in-Line Oil Quality Monitoring: Methodological Development Process towards Uncertainty Mitigation
(MDPI AG, 2018)Lubricant and hydraulic fluid ageing impacts the performance of the machines, gears, transmissions or automatisms where they are being used. This manuscript describes the work accomplished for bringing an innovative ... -
Multi-Physics Tool for Electrical Machine Sizing
(MDPI AG, 2020)Society is turning to electrification to reduce air pollution, increasing electric machine demand. For industrial mass production, a detailed design of one machine is usually done first, then a design of similar machines, ... -
Drawbead uplift force analytical model for deep drawing operations
(IOP Publishing Ltd., 2018)Drawbead uplift force calculation has been an open issue among the deep drawing tool maker and software developers in the last years. Starting from the original work of Stoughton (1988) many have been the models presented ... -
On the accurate characterization of the drawbead up-lift forces
(IOP Publishing Ltd., 2018)The competitiveness of the automotive sector has led to a high demand of accuracy and reduction in lead-time of the deep drawing tool making process. In that regard, the numerical simulation of the deep drawing process has ... -
Contact angle measurement for LiBr aqueous solutions on different surface materials used in absorption systems
(Elsevier Ltd., 2018)Wetting surface is a very important issue for the design of absorption applications and heat exchangers. The contact angle is deemed essential in wettability studies; However, LiBr aqueous solution contact angle studies ... -
FEM modeling of hard turning 42CrMoS4 steel
(Elsevier B.V., 2019) -
A mechanistic model to predict cutting force on orthogonal machining of Aluminum 7475-T7351 considering the edge radius
(Elsevier B.V., 2019)The ploughing force related with action of edge radius is an important factor which influences flow stress, chip formation or surface integrity. Some fraction of the cutting forces are called parasitic (additional) forces ... -
A population-specific material model for sagittal craniosynostosis to predict surgical shape outcomes
(Springer Nature, 2020)Sagittal craniosynostosis consists of premature fusion (ossification) of the sagittal suture during infancy, resulting in head deformity and brain growth restriction. Spring-assisted cranioplasty (SAC) entails skull incisions ... -
Analysis and Evaluation of a Wired/Wireless Hybrid Architecture for Distributed Control Systems With Mobility Requirements
(IEEE, 2019)Wireless communications offer significant benefits over wired communications, which has increased their popularity in industrial applications. Nevertheless, the existing wireless standard technologies do not satisfy the ...
