Listar Artikuluak-Ingeniaritza por autor "562eb17a2dabf441aa47e763e12489fb"
Mostrando ítems 1-6 de 6
-
Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour
Iragi, Mikel; Esnaola, Aritz; Morales, Unai; Aurrekoetxea, Jon; Aretxabaleta, Laurentzi (Elsevier, 2023) -
The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles
Morales, Unai; Esnaola, Aritz; Iragi, Mikel; Aretxabaleta, Laurentzi; Aurrekoetxea, Jon (Elsevier, 2021)The present study has analysed the effect of cross-section geometry and the printing pattern of continuous carbon reinforced polyamide on the axial and radial crushing behaviour. Each geometry and printing pattern generated ... -
Effect of voids on the impact properties of Non-Crimp fabric carbon/epoxy laminates manufactured by liquid composite Moulding
Mendikute, Julen; Baskaran, Maider; Aretxabaleta, Laurentzi; Aurrekoetxea, Jon (Elsevier, 2022)A great effort has been made to quantify the detrimental effect of voids on CFRP, nevertheless, the effect on impact properties has been barely studied and when it has been considered, it has always been for prepeg materials ... -
Impregnation quality diagnosis in Resin Transfer Moulding by machine learning
Mendikute, Julen; Plazaola Madinabeitia, Joanes; Baskaran, Maider; Zugasti, Ekhi; Aretxabaleta, Laurentzi; Aurrekoetxea, Jon (Elsevier Ltd., 2021)In recent years, several optimization strategies have been developed which reduce the overall defectiveness of the RTM manufactured part. RTM filling simulations showed that, even using optimized injection strategies, local ... -
Predicting the effect of voids generated during RTM on the low-velocity impact behaviour by machine learning-based surrogate models
Mendikute, Julen; Baskaran, Maider; Llavori, Inigo; Zugasti, Ekhi; Aretxabaleta, Laurentzi; Aurrekoetxea, Jon (Elsevier, 2023)The main objective of the present paper is to demonstrate the feasibility of machine-learning-based surrogate models for predicting low-velocity impact behaviour considering void content and location generated during the ... -
Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres
Morales, Unai; Esnaola, Aritz; Iragi, Mikel; Aretxabaleta, Laurentzi; Aurrekoetxea, Jon (Elsevier, 2021)The present paper investigates the suitability of cFF printed material and technologies for crashworthiness applications. To this end, the quasi-static and dynamic crush behaviour of 3D printed thin-walled hollow profiles ...