Simple record

dc.contributor.authorSilvestre Soriano, Elena
dc.contributor.authorGALDOS, Lander
dc.contributor.authorSáenz de Argandoña, Eneko
dc.contributor.authorMendiguren, Joseba
dc.date.accessioned2021-09-02T13:44:58Z
dc.date.available2021-09-02T13:44:58Z
dc.date.issued2015
dc.identifier.issn0020-7403en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=117620en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/5359
dc.description.abstractAlthough steel has been used in vehicles from the automotive industry's inception, different steel gradesare continually being developed in order to satisfy new fuel economy requirements. For example,advanced high strength steel grades (AHSS) are widely used due to their good strength/weight ratio.Because each steel grade has a different microstructure composition, they show different behaviourswhen they are subjected to different strain paths in forming processes. Materials with high yieldstrength tend to be influenced by phenomena of cyclic plasticity such as the Bauschinger Effect, whilelow yield strength materials tend to harden when they are subjected to cyclic loading.Different steel grades are used in different forming processes, which are usually optimised bynumerical tools such as Finite Element Models. This method requires proper hardening rules in order tocorrectly predict the real behaviour of the materials. For instance, AHSS are usually well modelled bymeans of mixed isotropic–kinematic hardening models.The methodology for developing a mixed hardening model to be implemented infinite elementcodes and simulate sheet forming processes requires three steps: (i) an appropriate experimental test toobtain stress–strain curves, (ii) a model able to predict accurately the behaviour of the material and (iii) aparameter identification method. Currently, there are few studies which analyse and model thehardening behaviour of different steel families following the same methodology. In this work, a widerange of steels from low to high yield strengths were characterised and their hardening behaviourmodelled with the same methodology so as to provide comparative data.In particular, the Chaboche and Lemaitre hardening model was successfullyfitted to the experi-mental stress–strain curves obtained from a tension–compression test. The test was performed at lowcyclic deformations (72%) due to the limitation of the test to achieve higher deformations during thecompression without buckling. Therefore, this modelization is useful for low deformation processes suchas the roll levelling process (Silvestre; 2013, Silvestre et al.Steel Res Int; 2012, 1295), in which themaximum deformations achieved are lower than 2%.en
dc.description.sponsorshipGobierno de Españaes
dc.language.isoengen
dc.publisherElsevier Ltd.en
dc.rights© 2015 Elsevier Ltd. All rights reserveden
dc.subjectCyclic hardeningen
dc.subjectBauschinger Effecen
dc.subjectMixed hardening lawen
dc.subjectParameter identificationen
dc.titleComparison of the hardening behaviour of different steel families : from mild and stainless steel to advanced high strength steelsen
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceInternational Journal of Mechanical Sciencesen
local.contributor.groupProcesos avanzados de conformación de materialeses
local.description.peerreviewedtrueen
local.description.publicationfirstpage10en
local.description.publicationlastpage20en
local.identifier.doihttps://doi.org/10.1016/j.ijmecsci.2015.07.013en
local.relation.projectIDMinisterio de Ciencia e Innovación. Plan Nacional de I+D+i 2008-2011. Programa Nacional de cooperación Público-Privada. Subprograma INNPACTOen
local.source.detailsVol. 101–102. Pp. 10–20. October, 2015en
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_6501en
oaire.versionhttp://purl.org/coar/version/c_ab4af688f83e57aaen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Simple record