Bilatu
14-tik 1-10 emaitza erakusten
A Note on Interpreting Tool Temperature Measurements from Thermography
(Taylor & Francis, 2015)
Thermography (thermal imaging) is a well-established experimental method for studying cutting tool temperature distributions. In one form, cutting edge temperatures within the chip / tool contact area are deduced from ...
Influencia del agua de mar en el comportamiento frente a impacto de baja energía de un nuevo laminado de resina natural reforzada con fibra de fique colombianoInfluence of seawater immersion in low energy impact behavior of a novel colombian fique fiber reinforced bio-resin laminate
(Universidad Nacional de Colombia, 2015)
This experimental work is aimed at the influence of seawater immersion in low impact energy behavior of a novel Colombian fique fiber reinforced bio-resin laminate. Such material was manufactured by vacuum infusion. The ...
Metal cutting experiments and modelling for improved determination of chip/tool contact temperature by infrared thermography
(Elsevier Ltd, 2015)
Temperature measurement in metal cutting at the chip and work contact is of central importance due to temperature dependence of tool wear and surface integrity. Infrared thermography is commonly employed to determine the ...
Uncertainty of Temperature Measurements in Dry Orthogonal Cutting of Titanium Alloys
(Elsevier, 2015)
Infrared radiation thermometer is used to measure the temperature of tool during dry orthogonal cutting of titanium alloys. The accuracy of measured temperature depends on several parameters such as the experimental set-up, ...
Hybrid ac/dc microgrids. Part II : Review and classification of control strategies
(Elsevier, 2015)
Microgrids are envisioned as one of the most suitable alternatives for the integration of distributed generation units in the utility grid, as they efficiently combine generation, energy storage and loads in the same ...
Hybrid ac/dc microgrids. Part I : Review and classification of topologies
(Elsevier, 2015)
Microgrids have been widely studied in the literature as a possible approach for the integration of distributed energy sources with energy storage systems in the electric network. Until now the most used configuration has ...
Desarrollo de competencias y habilidades a través de proyectos basados en empresas reales : análisis en asignaturas de Dirección de OperacionesTeaching Operations Management through real case studies: development of skills and competences
(AECA, Universidad de Sevilla, 2015)
The main aim of our work is to show how a student may get competences and skills through the development of real case studies. We implement this study in Operations Management courses of different Spanish universities. The ...
Procedure to predict residual stress pattern in spray transfer multipass welding
(Springer, 2015)
Gas metal arc welding (GMAW) is one of the most used joining method in the industry. However, one of the main problems of this process is the generation of residual stresses which have direct impact on the fatigue life of ...
Comparison of the hardening behaviour of different steel families : from mild and stainless steel to advanced high strength steels
(Elsevier Ltd., 2015)
Although steel has been used in vehicles from the automotive industry's inception, different steel gradesare continually being developed in order to satisfy new fuel economy requirements. For example,advanced high strength ...
Eyeface : a new multimethod tool to evaluate the perception of conceptual user experiences
(Elsevier, 2015)
Based on the identification of a new multimethod tool necessity, a new tool called Eyeface has been created by combining two different devices: the Eye-tracking and the Facereader. This research work analyses a new multimethod ...