Erregistro soila

dc.rights.licenseAttribution 4.0 International*
dc.contributor.authorPlata, Gorka
dc.contributor.authorSánchez-Fernández, Andrea
dc.contributor.authorLozares, Jokin
dc.contributor.authorHurtado, Iñaki
dc.date.accessioned2020-10-30T15:02:39Z
dc.date.available2020-10-30T15:02:39Z
dc.date.issued2020
dc.identifier.issn1996-1944en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=161520en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/1878
dc.description.abstractThe benefits of the novel Near Solidus Forming (NSF) process has shown previously in its ability to produce steel components with comparable as-forged mechanical properties but with a cost reduction of 10–15%. This study further pushes the NSF technology to produce parts that are conventionally diffcult to produce via conventional methods. A 2.7 kg 42CrMo4 steel grade component was manufactured into a complex geometry using only a 400t press. Different manufacturing parameters were evaluated to show their influence on the process and final component. A combination of X-ray fluorescence (XRF), optical microscopy and SEM analysis of the microstructure was also conducted revealing the deformation pattern of the material and shedding some light on how the material evolves during the process. The successful forging of these components shows the capability to produce previously deemed diffcult geometries, with much a lower specification forging press, in a single deformation.en
dc.description.sponsorshipUnión Europeaes
dc.language.isoengen
dc.publisherMDPI AGen
dc.rights© 2020 by the authors. Licensee MDPI, Basel, Switzerlanden
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectsteelen
dc.subjectMetal formingen
dc.subjectnear solidus formingen
dc.subjectcomplex geometriesen
dc.titlePreliminary Study on the Capability of the Novel Near Solidus Forming (NSF) Technology to Manufacture Complex Steel Componentses
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceMaterialsen
local.contributor.groupProcesos avanzados de conformación de materialeses
local.description.peerreviewedtrueen
local.identifier.doihttps://doi.org/10.3390/ma13204682en
local.relation.projectIDinfo:eu-repo/grantAgreement/EC/RFCS/RFCS-2018-800763/Hybrid Semi-Solid Forming/HSSFen
local.rights.publicationfeeAPCen
local.rights.publicationfeeamount1880 EUR (2000 CHF)en
local.source.detailsVol. 13. N. 20. N. artículo 4682, 2020en
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_6501en
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85en


Item honetako fitxategiak

Thumbnail
Thumbnail

Item hau honako bilduma honetan/hauetan agertzen da

Erregistro soila

Attribution 4.0 International
Bestelakorik adierazi ezean, itemaren baimena horrela deskribatzen da: Attribution 4.0 International