Erregistro soila

dc.rights.licenseAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.contributor.authorARRAZOLA, PEDRO JOSE
dc.contributor.authorKortabarria, Aitor
dc.contributor.otherRodríguez, J.
dc.contributor.otherCante, J.
dc.contributor.otherOliver, J.
dc.date.accessioned2020-07-06T11:25:35Z
dc.date.available2020-07-06T11:25:35Z
dc.date.issued2013
dc.identifier.issn2212-8271en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/1782
dc.description.abstractThe (PFEM) is employed to simulate orthogonal metal cutting of 42CD4 steel. The objectives of this work are mainly three: The first one is to validate PFEM strategies as an efficient tool for numerical simulation of metal cutting processes by a detailed comparison (forces, stresses, strains, temperature, etc.) with results provided by commercial finite element software (Abaqus, AdvantEdge, Deform) and experimental results. The second is to carry out a sensibility analysis to geometric and cutting conditions using PFEM by means of a Design of Experiments (DoE) methodology. And the third one is to identify the advantages and drawbacks of PFEM over FEM and meshless strategies. Also, this work identifies some advantages of PFEM that directly apply to the numerical simulation of machining processes: (i) allows the separation of chip and workpiece without using a physical or geometrical criterion (ii) presents negligible numerical diffusion of state variables due to continuous triangulation, (iii) is an efficient numerical scheme in comparison with FEM.en
dc.language.isoengen
dc.publisherElsevieren
dc.rights© 2013 The Authorsen
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectParticle Finite Element Methoden
dc.subjectOrthogonal cuttingen
dc.subjectDesign of experimentsen
dc.titleA sensibility analysis to geometric and cutting conditions using the particle finite element method (PFEM)en
dc.typeinfo:eu-repo/semantics/articleen
dcterms.accessRightsinfo:eu-repo/semantics/openAccessen
dcterms.sourceProcedia CIRPen
dc.description.versioninfo:eu-repo/semantics/publishedVersionen
local.contributor.groupMecanizado de alto rendimientoes
local.description.peerreviewedtrueen
local.description.publicationfirstpage105en
local.description.publicationlastpage110en
local.identifier.doihttp://dx.doi.org/10.1016/j.procir.2013.06.073en
local.contributor.otherinstitutionhttps://ror.org/03mb6wj31es
local.source.detailsVol. 8. Pp. 105–110, 2013eu_ES
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore


Item honetako fitxategiak

Thumbnail
Thumbnail

Item hau honako bilduma honetan/hauetan agertzen da

Erregistro soila

Attribution-NonCommercial-NoDerivatives 4.0 International
Bestelakorik adierazi ezean, itemaren baimena horrela deskribatzen da: Attribution-NonCommercial-NoDerivatives 4.0 International