Erregistro soila

dc.contributor.authorUrrutibeaskoa, Idoia
dc.contributor.otherTorres, Miguel Ángel
dc.contributor.otherGarcía, Gustavo
dc.contributor.otherMadre, María Antonieta
dc.contributor.otherDiez, Juan Carlos
dc.contributor.otherSotelo, Andrés
dc.date.accessioned2020-06-09T09:50:50Z
dc.date.available2020-06-09T09:50:50Z
dc.date.issued2019
dc.identifier.issn2095-8226en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=148524en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/1681
dc.description.abstractThis work presents a short and very efficientmethod to produce high performance textured Ca3Co4O9thermoelectric materials through initial powders modifica-tion. Microstructure has shown good grain orientation, andlow porosity while slightly lower grain sizes were obtained insamples prepared from attrition milled powders. All samplesshow the high density of around 96% of the theoretical value.These similar characteristics are reflected in, approximately,the same electrical resistivity and Seebeck coefficient valuesfor both types of samples. However, in spite of similar powerfactor (PF) at low temperatures, it is slightly higher at hightemperature for the attrition milled samples. On the otherhand, the processing time reduction (from 38 to 2 h) whenusing attrition milled precursors, leads to lower mechanicalproperties in these samples. All these data clearly point out tothe similar characteristics of both kinds of samples, with adrastic processing time decrease when using attrition milledprecursors, which is of the main economic importance whenconsidering their industrial production.en
dc.description.sponsorshipGobierno Vascoes
dc.language.isoengen
dc.publisherScience China Pressen
dc.publisherSpringer-Verlag GmbHen
dc.rights© Science China Press and Springer-Verlag GmbHen
dc.subjectCeramicsen
dc.subjectOxidesen
dc.subjecthot-pressingen
dc.subjectelectrical propertiesen
dc.subjectpower factoren
dc.titleFast preparation route to high-performances textured Sr-doped Ca 3 Co 4 O 9 thermoelectric materials through precursor powder modificationen
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceScience China Materialsen
local.contributor.groupDiseño y mecánica estructurales
local.description.peerreviewedtrueen
local.description.publicationfirstpage399en
local.description.publicationlastpage406en
local.identifier.doihttp://dx.doi.org/10.1007/s40843-018-9339-1en
local.relation.projectIDGV/Elkartek 2017/KK-2017-00099/CAPV/High Temperature Oxide Module/HITOMen
local.contributor.otherinstitutionhttps://ror.org/012a91z28es
local.contributor.otherinstitutionCentro Stirling S. Coop.es
local.source.detailsVol. 62. Nº 3. Pp. 399–406. March, 2020eu_ES
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_6501en
oaire.versionhttp://purl.org/coar/version/c_ab4af688f83e57aaen


Item honetako fitxategiak

Thumbnail

Item hau honako bilduma honetan/hauetan agertzen da

Erregistro soila