Zerrendatu Kongresuak-Ingeniaritza honen arabera: non argitaratua "Procedia CIRP"
13-tik 1-13 emaitza erakusten
-
Application of material constitutive and friction models parameters identified with AI and ALE to a CEL orthogonal cutting model
(Elsevier B.V., 2023)The identification of input parameters for funite element modelling of the cutting process is still a complex task as the experimental testing equipment cannot reach its combined levels of strains, strain rates and ... -
A Big Data Analytical Architecture for the Asset Management
(Elsevier B.V., 2017)The paper highlights the characteristics of data and big data analytics in manufacturing, more specifically for the industrial asset management. The authors highlight important aspects of the analytical system architecture ... -
Digital Twin for Final Generated Surface Dimensional Error Analysis at Tool Path Level in Contour Milling
(Elsevier B.V., 2023)Surface errors in contour milling due to force induced tool deflections have a direct impact on the dimensional and geometrical accuracy of the finished part. In this sense, virtual manufacturing systems provide the ... -
A digital twin framework for the simulation and optimization of production systems
(Elsevier B.V., 2021)Industry 4.0 has raised the expectations on productivity, automation, and resource efficiency of manufacturing systems. This paper proposes a digital twin framework for the simulation and optimization of production lines ... -
Drilling process monitoring: A framework for data gathering and feature extraction techniques
(Elsevier B.V., 2021) -
Effect of heat Treatment Conditions on the Machinability of Ti64 and Ti54 M Alloys
(Elsevier, 2012)Orthogonal tests on cylindrical workpieces were carried out to analyze the effect of heat treatment on the machinability of newly developed Ti54M titanium alloy in comparison with Ti64. This paper focuses on the comparison ... -
Effect of innovative finishing operations on the tribological performance of steel 27MnCr5
(Elsevier Ltd., 2022)Transmission shafts used in the automotive sector must have a good tribological performance, and therefore an enhanced surface integrity. This paper aims to study the effect of eco-friendly innovative finishing operations ... -
Enhancing surface integrity of A7050-T7451 aluminium alloy by pneumatic machine hammer peening
(Elsevier Ltd., 2022)Aerostructures withstand cyclic mechanical loads and therefore, their design must fulfil surface integrity and fatigue strength requirements. This paper studies the effect of pneumatic machine hammer peening on surface ... -
Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining
(Elsevier, 2015)Ti6Al4 V is a titanium alloy widely used in the aeronautical industry and machining is often adopted to manufacture it. These parts must satisfy requirements specified by the customer. A crucial characteristic of aircraft ... -
Force Prediction Methodology for Complex Shape Broaching
(Elsevier B.V., 2023)Broaching is widely used for the manufacturing of complex geometries which requires high dimensional accuracy and surface finishing (e.g., fir tree, dovetail). A software development for force prediction in complex shape ... -
Influence of tool wear on residual stresses when turning Inconel 718
(Elsevier, 2016)This paper analyzes the effect of tool wear on residual stresses when turning. Inconel 718 discs were machined for prolonged periods at several cutting speeds, feed-rates and depth of cut. Tests were interrupted to measure ... -
Machining behaviour of Ti-6Al-4V and Ti-5553 alloys in interrupted cutting with PVD coated cemented carbide
(Elsevier, 2012)Machining behaviour of Ti-5553, Ti-6Al-4 V mill-annealed (MA) and Ti-6Al-4 V solution treated and aged (STA) alloys was studied in different interrupted cutting operations using PVD coated cemented carbide tools. Single ... -
Personalised Trachea Stent Designer: a Knowledge Feature
(Elsevier, 2012)Modelling of anatomical parts is usually tackled through triangulated models with specialised Bio-CAD applications. If features beyond anatomy are required, geometry is usually translated into NURBS geometry for further ...