Registro sencillo

dc.rights.licenseAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.contributor.authorPérez Guisado, Ion
dc.contributor.authorMadariaga, Aitor
dc.contributor.authorARRAZOLA, PEDRO JOSE
dc.contributor.authorCUESTA ZABALAJAUREGUI, MIKEL
dc.contributor.authorGaray, Ainara
dc.contributor.otherRuiz, J.J.
dc.contributor.otherRubio, F.J.
dc.contributor.otherSanchez, R.
dc.date.accessioned2018-07-27T09:56:26Z
dc.date.available2018-07-27T09:56:26Z
dc.date.issued2018
dc.identifier.issn2212-8271eu_ES
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=147891eu_ES
dc.identifier.urihttps://hdl.handle.net/20.500.11984/1097
dc.description.abstractThe guarantee of surface integrity has become a primary objective for researchers when analysing the reliability of machined aircraft aluminium alloy structural parts in high-speed machining. This work studies the effect of cutting speed on the surface integrity of face milled 7050-T7451 aluminium workpieces. First, 7050-T7451 aluminium workpieces were face milled under dry conditions using three cutting speeds (200, 800, 1400 m/min) at constant feed (0.20 mm/tooth) and depth of cut (1 mm). An indexable face milling cutter with a diameter of 50 mm with five uncoated inserts was used in the face milling tests. During the machining process, cutting forces were acquired employing a Kistler dynamometer in order to understand the influence of the mechanical load on the final surface quality. The surface roughness p roduced by the milling process was measured using a portable rugosimeter. The residual stresses generated by the cutting process were measured by the holedrilling technique. In addition, small specimens were cut out from the workpieces and microstructural alterations of the surface layer were analysed employing optical microscopy techniques. The results demonstrate that the magnitude of residual stresses and the thickness of the affected layer is sensitive to the cutting speed, while surface roughness and microstructural defects do not show significant variations for the tested conditions.
dc.description.sponsorshipThe authors thank the Spanish Governments for the financial support given to the project TEMPROCEN (CIEN_ IDI-20141299).eu_ES
dc.language.isoengeu_ES
dc.publisherElsevier Ltd.eu_ES
dc.rights© 2018 The Authorseu_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectaluminium alloyseu_ES
dc.subjectmillingeu_ES
dc.subjectSurface Integrityeu_ES
dc.titleEffect of cutting speed on the surface integrity of face milled 7050-T7451 aluminium workpieceseu_ES
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2eu_ES
dcterms.sourceProcedia CIRPeu_ES
local.contributor.groupMecanizado de alto rendimientoeu_ES
local.description.peerreviewedtrueeu_ES
local.description.publicationfirstpage460eu_ES
local.description.publicationlastpage465eu_ES
local.identifier.doihttps://doi.org/10.1016/j.procir.2018.05.034eu_ES
local.relation.projectIDGobierno de España. (CIEN_IDI-20141299). TEMPROCENeu_ES
local.source.detailsVol. 71eu_ES
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_6501eu_ES
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85eu_ES


Ficheros en el ítem

Thumbnail
Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(es)

Registro sencillo

Attribution-NonCommercial-NoDerivatives 4.0 International
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution-NonCommercial-NoDerivatives 4.0 International