Bilatu
32-tik 21-30 emaitza erakusten
Characterization of Ti64 forging friction factor using ceramic coatings and different contact conditions
(Elsevier, 2017)
Hot forging processes are highly influenced by the contact conditions between the billet and the dies. A wrong definition of the contact conditions may lead to wrong predictions of the final component geometry, the quantity ...
Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model
(Springer, 2021)
Cold forging is a manufacturing process where a bar stock is inserted into a die and squeezed with a second closed die. It is one of the most widely used chipless forming processes, often requiring no machining or additional ...
Hole expansion test of third generation steels
(AIP Publishing, 2017)
The trend towards the implementation of new materials in the chassis of the automobiles is considerably making more complex the manufacturing of the components that built it up. In this scenario materials with higher ...
Elastic behaviour characterisation of TRIP 700 steel by means of loading-unloading tests
(Elsevier Ltd., 2015)
The elastic behaviour of TRIP 700 steel under plastic deformation is analysed. The analysis is carried out by means of classical tensile test and loading–unloading cyclic tests. These tests have been performed using high ...
A review of the effects of cyclic contact loading on fretting fatigue behaviour
(Sage Publishing Ltd., 2020)
A damage phenomenon called fretting fatigue frequently takes place when two contact bodies are clamped together under a normal contact load along with a small-scale oscillatory motion due to cyclic loading. In contrast to ...
Initiation of dynamic recrystallization of as-cast N08028 alloy
(ESAFORM, 2021)
The use of high nickel content austenitic stainless steels (SASS) has significantly increased in the last decade. The corrosion and high fatigue resistance of these materials make them suitable for manufacturing oil country ...
Plasticity evolution of an aluminum-magnesium alloy under abrupt strain path changes
(Springer, 2022)
During the forming and manufacturing of engineering materials, plasticity behavior could be evolving significantly due to complex deformation history. Therefore, this study aims to characterize the plasticity evolution of ...
In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel
(Elsevier, 2022)
Modeling the elastic behavior of dual-phase steels is complex due to the strain dependency of Young's modulus and high elastic nonlinearity. Since it is assumed that reasons for this are to be found in microstructural ...
A coupled 3D wear and fatigue numerical procedure: Application to fretting problems in ultra-high strength steel wires
(Elsevier Ltd., 2021)
This work presents a coupled 3D wear and fatigue numerical procedure for fretting problems in ultra-high strength steel wires that combines Archard’s wear equation with the Smith–Watson–Topper parameter to predict crack ...
Digital twin development for the sensitivity analysis of near solidus forming process
(Materials Research Forum LLC, 2023)
Near Solidus Forming (NSF) process, performed at semi-solid material state is gaining popularity due to its good physical properties, low manufacturing cost and material waste. Although the process possesses many advantages ...